5 #include <dt-bindings/input/input.h>
8 model = "FRITZ7320 - 1&1 HomeServer";
11 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
16 led-failsafe = &power;
19 led-internet = &info_green;
25 reg = <0x0 0x4000000>;
31 compatible = "lantiq,nor";
33 reg = <0 0x0 0x1000000>;
38 compatible = "fixed-partitions";
42 ath9k_cal: partition@0 {
44 reg = <0x00000 0x20000>;
50 reg = <0x20000 0xf60000>;
55 reg = <0xf80000 0x40000>;
61 reg = <0xfc0000 0x40000>;
69 compatible = "ath9k,eeprom";
70 ath,eep-flash = <&ath9k_cal 0x985>;
71 ath,device-id = /bits/ 16 <0xff1d 0x2d>;
76 gpio: pinmux@E100B10 {
77 pinctrl-names = "default";
78 pinctrl-0 = <&state_default>;
80 state_default: pinmux {
82 lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
83 lantiq,function = "pci";
86 lantiq,groups = "req1", "req2", "req3", "req4";
88 lantiq,open-drain = <1>;
92 lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
110 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
115 compatible = "gpio-keys-polled";
116 #address-cells = <1>;
118 poll-interval = <100>;
122 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
123 linux,code = <KEY_RFKILL>;
127 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
128 linux,code = <BTN_2>;
133 compatible = "gpio-leds";
135 label = "fritz7320:green:power";
136 gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
137 default-state = "keep";
140 label = "fritz7320:green:fon";
141 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
144 label = "fritz7320:green:dect";
145 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
148 label = "fritz7320:green:wlan";
149 gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
151 info_green: info_green {
152 label = "fritz7320:green:info";
153 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
156 label = "fritz7320:red:info";
157 gpios = <&gpio 45 GPIO_ACTIVE_LOW>;