5 #include <dt-bindings/input/input.h>
8 model = "FRITZ7360SL - 1&1 HomeServer";
11 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
15 led-boot = &power_green;
16 led-failsafe = &power_red;
17 led-running = &power_green;
19 led-internet = &info_green;
20 led-dsl = &power_green;
25 reg = <0x0 0x8000000>;
31 compatible = "lantiq,nor";
33 reg = <0 0x0 0x1000000>;
37 compatible = "fixed-partitions";
40 urlader: partition@0 {
42 reg = <0x00000 0x20000>;
48 reg = <0x20000 0xf60000>;
53 reg = <0xf80000 0x40000>;
59 reg = <0xfc0000 0x40000>;
66 gpio: pinmux@E100B10 {
67 pinctrl-names = "default";
68 pinctrl-0 = <&state_default>;
70 state_default: pinmux {
72 lantiq,groups = "mdio";
73 lantiq,function = "mdio";
76 lantiq,pins = "io37", "io44";
91 lantiq,portmask = <0x3>;
100 compatible = "ath9k,eeprom";
101 ath,eep-flash = <&urlader 0x985>;
108 compatible = "lantiq,phy-xrx200";
109 firmware = "lantiq/vr9_phy11g_a2x.bin";
114 compatible = "gpio-keys-polled";
115 #address-cells = <1>;
117 poll-interval = <100>;
120 gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
121 linux,code = <BTN_2>;
125 gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
126 linux,code = <BTN_1>;
131 compatible = "gpio-leds";
134 label = "fritz7360sl:green:power";
135 gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
136 default-state = "keep";
139 label = "fritz7360sl:red:power";
140 gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
143 label = "fritz7360sl:red:info";
144 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
146 info_green: info_green {
147 label = "fritz7360sl:green:info";
148 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
151 label = "fritz7360sl:green:wlan";
152 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
155 label = "fritz7360sl:green:dect";
156 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
163 compatible = "lantiq,xrx200-pdi";
164 #address-cells = <1>;
167 mac-address = [ 00 11 22 33 44 55 ];
171 compatible = "lantiq,xrx200-pdi-port";
174 phy-handle = <&phy0>;
175 // gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
178 compatible = "lantiq,xrx200-pdi-port";
181 phy-handle = <&phy1>;
182 // gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
185 compatible = "lantiq,xrx200-pdi-port";
188 phy-handle = <&phy11>;
191 compatible = "lantiq,xrx200-pdi-port";
194 phy-handle = <&phy13>;
199 #address-cells = <1>;
201 compatible = "lantiq,xrx200-mdio";
202 phy0: ethernet-phy@0 {
204 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
206 phy1: ethernet-phy@1 {
208 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
210 phy11: ethernet-phy@11 {
212 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
214 phy13: ethernet-phy@13 {
216 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";