5 #include <dt-bindings/input/input.h>
8 model = "FRITZ7360SL - 1&1 HomeServer";
11 led-boot = &power_green;
12 led-failsafe = &power_red;
13 led-running = &power_green;
15 led-internet = &info_green;
20 reg = <0x0 0x8000000>;
26 compatible = "lantiq,nor";
28 reg = <0 0x0 0x1000000>;
32 compatible = "fixed-partitions";
35 urlader: partition@0 {
37 reg = <0x00000 0x20000>;
43 reg = <0x20000 0xf60000>;
48 reg = <0xf80000 0x40000>;
54 reg = <0xfc0000 0x40000>;
61 gpio: pinmux@E100B10 {
62 pinctrl-names = "default";
63 pinctrl-0 = <&state_default>;
65 state_default: pinmux {
67 lantiq,groups = "mdio";
68 lantiq,function = "mdio";
71 lantiq,pins = "io37", "io44";
86 lantiq,portmask = <0x3>;
95 compatible = "lantiq,phy-xrx200";
96 firmware = "lantiq/vr9_phy11g_a2x.bin";
101 compatible = "gpio-keys-polled";
102 #address-cells = <1>;
104 poll-interval = <100>;
107 gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
108 linux,code = <KEY_PHONE>;
112 gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
113 linux,code = <KEY_WLAN>;
118 compatible = "gpio-leds";
121 label = "fritz7360sl:green:power";
122 gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
123 default-state = "keep";
126 label = "fritz7360sl:red:power";
127 gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
130 label = "fritz7360sl:red:info";
131 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
133 info_green: info_green {
134 label = "fritz7360sl:green:info";
135 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
138 label = "fritz7360sl:green:wlan";
139 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
142 label = "fritz7360sl:green:dect";
143 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
150 compatible = "lantiq,xrx200-pdi";
151 #address-cells = <1>;
154 mac-address = [ 00 11 22 33 44 55 ];
158 compatible = "lantiq,xrx200-pdi-port";
161 phy-handle = <&phy0>;
164 compatible = "lantiq,xrx200-pdi-port";
167 phy-handle = <&phy1>;
170 compatible = "lantiq,xrx200-pdi-port";
173 phy-handle = <&phy11>;
176 compatible = "lantiq,xrx200-pdi-port";
179 phy-handle = <&phy13>;
184 #address-cells = <1>;
186 compatible = "lantiq,xrx200-mdio";
187 phy0: ethernet-phy@0 {
189 compatible = "ethernet-phy-id004d.d076", "ethernet-phy-ieee802.3-c22";
190 reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
192 phy1: ethernet-phy@1 {
194 compatible = "ethernet-phy-id004d.d076", "ethernet-phy-ieee802.3-c22";
195 reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
197 phy11: ethernet-phy@11 {
199 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
201 phy13: ethernet-phy@13 {
203 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
211 #interrupt-cells = <1>;
213 #address-cells = <3>;
217 compatible = "pci168c,002e";
219 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */