3 #include <dt-bindings/input/input.h>
7 led-boot = &power_green;
8 led-failsafe = &power_red;
9 led-running = &power_green;
12 led-internet = &internet_green;
13 led-wifi = &wireless_green;
17 reg = <0x0 0x8000000>;
21 gpio: pinmux@E100B10 {
22 pinctrl-names = "default";
23 pinctrl-0 = <&state_default>;
25 state_default: pinmux {
27 lantiq,groups = "exin3";
28 lantiq,function = "exin";
31 lantiq,groups = "mdio";
32 lantiq,function = "mdio";
35 lantiq,groups = "gphy0 led1", "gphy1 led1",
36 "gphy0 led2", "gphy1 led2";
37 lantiq,function = "gphy";
39 lantiq,open-drain = <0>;
43 lantiq,groups = "stp";
44 lantiq,function = "stp";
46 lantiq,open-drain = <0>;
50 lantiq,groups = "req1";
51 lantiq,function = "pci";
53 lantiq,open-drain = <1>;
57 lantiq,groups = "gnt1";
58 lantiq,function = "pci";
60 lantiq,open-drain = <0>;
66 lantiq,open-drain = <0>;
77 lantiq,open-drain = <0>;
81 lantiq,groups = "nand cle", "nand ale";
82 lantiq,function = "ebu";
84 lantiq,open-drain = <0>;
88 lantiq,groups = "nand cs1";
89 lantiq,function = "ebu";
90 lantiq,open-drain = <0>;
97 compatible = "lantiq,gpio-stp-xway";
98 reg = <0xE100BB0 0x40>;
102 lantiq,shadow = <0xffffff>;
103 lantiq,groups = <0x7>;
111 gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
112 lantiq,portmask = <0x3>;
117 gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
122 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
127 compatible = "lantiq,phy-xrx200";
128 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
129 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
134 compatible = "gpio-keys-polled";
135 #address-cells = <1>;
137 poll-interval = <100>;
141 gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
142 linux,code = <KEY_RESTART>;
147 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
148 linux,code = <KEY_RFKILL>;
153 compatible = "gpio-leds";
156 label = "p2812hnufx:red:internet";
157 gpios = <&stp 16 GPIO_ACTIVE_LOW>;
159 internet_green: internet_green {
160 label = "p2812hnufx:green:internet";
161 gpios = <&stp 17 GPIO_ACTIVE_LOW>;
163 dsl_green: dsl_green {
164 label = "p2812hnufx:green:dsl";
165 gpios = <&stp 18 GPIO_ACTIVE_LOW>;
168 label = "p2812hnufx:orange:dsl";
169 gpios = <&stp 19 GPIO_ACTIVE_LOW>;
172 label = "p2812hnufx:orange:wlan";
173 gpios = <&stp 20 GPIO_ACTIVE_LOW>;
175 wireless_green: wireless_green {
176 label = "p2812hnufx:green:wlan";
177 gpios = <&stp 21 GPIO_ACTIVE_LOW>;
180 label = "p2812hnufx:red:power";
181 gpios = <&stp 22 GPIO_ACTIVE_LOW>;
183 power_green: power2 {
184 label = "p2812hnufx:green:power";
185 gpios = <&stp 23 GPIO_ACTIVE_LOW>;
186 default-state = "keep";
189 label = "p2812hnufx:green:phone";
190 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
193 label = "p2812hnufx:orange:phone";
194 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
197 label = "p2812hnufx:orange:phone2";
198 gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
201 label = "p2812hnufx:green:phone2";
202 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
209 compatible = "lantiq,xrx200-pdi";
210 #address-cells = <1>;
213 mac-address = [ 00 11 22 33 44 55 ];
217 compatible = "lantiq,xrx200-pdi-port";
220 phy-handle = <&phy0>;
223 compatible = "lantiq,xrx200-pdi-port";
226 phy-handle = <&phy1>;
229 compatible = "lantiq,xrx200-pdi-port";
232 phy-handle = <&phy11>;
235 compatible = "lantiq,xrx200-pdi-port";
238 phy-handle = <&phy13>;
241 compatible = "lantiq,xrx200-pdi-port";
244 phy-handle = <&phy5>;
249 #address-cells = <1>;
251 compatible = "lantiq,xrx200-mdio";
253 phy0: ethernet-phy@0 {
255 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
257 phy1: ethernet-phy@1 {
259 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
261 phy5: ethernet-phy@5 {
263 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
265 phy11: ethernet-phy@11 {
267 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
269 phy13: ethernet-phy@13 {
271 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";