5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
8 /* the power led can't be controlled, use the wps led instead */
20 reg = <0x0 0x4000000>;
25 compatible = "lantiq,spi-xway";
26 reg = <0xE100800 0x100>;
27 interrupt-parent = <&icu0>;
28 interrupts = <22 23 24>;
34 compatible = "jedec,spi-nor";
36 spi-max-frequency = <33250000>;
46 reg = <0x20000 0x7a0000>;
51 reg = <0x7c0000 0x10000>;
56 ath9k_cal: partition@7d0000 {
57 reg = <0x7d0000 0x30000>;
58 label = "boardconfig";
64 gpio: pinmux@E100B10 {
65 pinctrl-names = "default";
66 pinctrl-0 = <&state_default>;
68 state_default: pinmux {
70 lantiq,groups = "mdio";
71 lantiq,function = "mdio";
74 lantiq,groups = "gphy0 led1", "gphy1 led1";
75 lantiq,function = "gphy";
77 lantiq,open-drain = <0>;
83 lantiq,open-drain = <0>;
87 lantiq,groups = "spi", "spi_cs4";
88 lantiq,function = "spi";
101 compatible = "lantiq,xrx200-net";
102 reg = < 0xE108000 0x3000 /* switch */
103 0xE10B100 0x70 /* mdio */
104 0xE10B1D8 0x30 /* mii */
105 0xE10B308 0x30 /* pmac */
107 interrupt-parent = <&icu0>;
108 interrupts = <73 72>;
111 compatible = "lantiq,xrx200-pdi";
112 #address-cells = <1>;
115 mtd-mac-address = <&ath9k_cal 0xf100>;
119 compatible = "lantiq,xrx200-pdi-port";
122 phy-handle = <&phy0>;
123 // gpios = <&gpio 42 1>;
126 compatible = "lantiq,xrx200-pdi-port";
129 phy-handle = <&phy5>;
132 compatible = "lantiq,xrx200-pdi-port";
135 phy-handle = <&phy11>;
138 compatible = "lantiq,xrx200-pdi-port";
141 phy-handle = <&phy13>;
146 #address-cells = <1>;
148 compatible = "lantiq,xrx200-mdio";
149 phy0: ethernet-phy@0 {
151 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
153 phy5: ethernet-phy@5 {
155 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
157 phy11: ethernet-phy@11 {
159 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
161 phy13: ethernet-phy@13 {
163 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
170 gpios = <&gpio 33 0>;
171 lantiq,portmask = <0x3>;
176 gpios = <&gpio 33 0>;
181 compatible = "lantiq,phy-xrx200";
182 firmware = "lantiq/vr9_phy11g_a2x.bin";
187 compatible = "lantiq,pcie-xway";
191 compatible = "ath9k,eeprom";
192 ath,eep-flash = <&ath9k_cal 0x21000>;
193 ath,mac-offset = <0xf100>;
201 compatible = "gpio-keys-polled";
202 #address-cells = <1>;
204 poll-interval = <100>;
208 linux,code = <0x198>;
215 linux,input-type = <5>; /* EV_SW */
220 gpios = <&gpio 39 1>;
221 linux,code = <0x211>;
226 compatible = "gpio-leds";
238 gpios = <&gpio 19 0>;
242 gpios = <&gpio 20 0>;
246 gpios = <&gpio 37 0>;