target/linux/lantiq/dts/VG3503J.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "VG3503J - BT OpenReach VDSL Modem";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x2000000>;
  14         };
  15
  16         fpi@10000000 {
  17                 localbus@0 {
  18                         ranges = <0 0 0x0 0x3ffffff>;
  19                         nor-boot@0 {
  20                                 compatible = "lantiq,nor";
  21                                 bank-width = <2>;
  22                                 reg = <0 0x0 0x2000000>;
  23                                 #address-cells = <1>;
  24                                 #size-cells = <1>;
  25
  26                                 partition@0 {
  27                                         label = "uboot";
  28                                         reg = <0x00000 0x20000>;
  29                                 };
  30
  31                                 partition@20000 {
  32                                         label = "kernel";
  33                                         reg = <0x20000 0x180000>;
  34                                 };
  35
  36                                 partition@1a0000 {
  37                                         label = "rootfs";
  38                                         reg = <0x1a0000 0x5a0000>;
  39                                 };
  40
  41                                 partition@740000 {
  42                                         label = "btagent";
  43                                         reg = <0x740000 0x80000>;
  44                                 };
  45
  46                                 partition@7c0000 {
  47                                         label = "pri_bfocus_cfg";
  48                                         reg = <0x7c0000 0x10000>;
  49                                 };
  50
  51                                 partition@7d0000 {
  52                                         label = "sec_bfocus_cfg";
  53                                         reg = <0x7d0000 0x10000>;
  54                                 };
  55
  56                                 partition@7e0000 {
  57                                         label = "sysconfig";
  58                                         reg = <0x7e0000 0x10000>;
  59                                 };
  60
  61                                 partition@7f0000 {
  62                                         label = "misc_cfg";
  63                                         reg = <0x7f0000 0x10000>;
  64                                 };
  65                         };
  66                 };
  67
  68                 gpio: pinmux@E100B10 {
  69                         pinctrl-names = "default";
  70                         pinctrl-0 = <&state_default>;
  71
  72                         state_default: pinmux {
  73                                 mdio {
  74                                         lantiq,groups = "mdio";
  75                                         lantiq,function = "mdio";
  76                                 };
  77                         };
  78                 };
  79
  80                 eth@E108000 {
  81                         #address-cells = <1>;
  82                         #size-cells = <0>;
  83                         compatible = "lantiq,xrx200-net";
  84                         reg = < 0xE108000 0x3000 /* switch */
  85                                 0xE10B100 0x70 /* mdio */
  86                                 0xE10B1D8 0x30 /* mii */
  87                                 0xE10B308 0x30 /* pmac */
  88                         >;
  89                         interrupt-parent = <&icu0>;
  90                         interrupts = <73 72>;
  91
  92                         lan1: interface@0 {
  93                                 compatible = "lantiq,xrx200-pdi";
  94                                 #address-cells = <1>;
  95                                 #size-cells = <0>;
  96                                 reg = <0>;
  97                                 mac-address = [ 00 11 22 33 44 55 ];
  98                                 lantiq,wan;
  99                                 ethernet@4 {
 100                                         compatible = "lantiq,xrx200-pdi-port";
 101                                         reg = <4>;
 102                                         phy-mode = "mii";
 103                                         phy-handle = <&phy13>;
 104                                 };
 105                         };
 106
 107                         lan2: interface@1 {
 108                                 compatible = "lantiq,xrx200-pdi";
 109                                 #address-cells = <1>;
 110                                 #size-cells = <0>;
 111                                 reg = <1>;
 112                                 mac-address = [ 00 11 22 33 44 56 ];
 113
 114                                 ethernet@2 {
 115                                         compatible = "lantiq,xrx200-pdi-port";
 116                                         reg = <2>;
 117                                         phy-mode = "mii";
 118                                         phy-handle = <&phy11>;
 119                                 };
 120                         };
 121
 122                         mdio@0 {
 123                                 #address-cells = <1>;
 124                                 #size-cells = <0>;
 125                                 compatible = "lantiq,xrx200-mdio";
 126                                 phy11: ethernet-phy@11 {
 127                                         reg = <0x11>;
 128                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 129                                         lantiq,c45-reg-init = <1 0 0 0>;
 130                                 };
 131                                 phy13: ethernet-phy@13 {
 132                                         reg = <0x13>;
 133                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 134                                         lantiq,c45-reg-init = <1 0 0 0>;
 135                                 };
 136                         };
 137                 };
 138         };
 139
 140         gphy-xrx200 {
 141                 compatible = "lantiq,phy-xrx200";
 142                 firmware = "lantiq/vr9_phy22f_a1x.bin";
 143                 phys = [ 00 01 ];
 144         };
 145
 146         gpio-keys-polled {
 147                 compatible = "gpio-keys-polled";
 148                 #address-cells = <1>;
 149                 #size-cells = <0>;
 150                 poll-interval = <100>;
 151                 reset {
 152                         label = "reset";
 153                         gpios = <&gpio 6 1>;
 154                         linux,code = <0x198>;
 155                 };
 156         };
 157
 158         gpio-leds {
 159                 compatible = "gpio-leds";
 160
 161                 port2orange {
 162                         label = "bt:orange:port2";
 163                         gpios = <&gpio 2 0>;
 164                 };
 165                 lan2 {
 166                         label = "bt:green:lan2";
 167                         gpios = <&gpio 5 0>;
 168                 };
 169                 port2green {
 170                         label = "bt:green:port2";
 171                         gpios = <&gpio 7 0>;
 172                 };
 173                 power2 {
 174                         label = "power2";
 175                         gpios = <&gpio 14 1>;
 176                 };
 177                 dsl {
 178                         label = "bt:green:dsl";
 179                         gpios = <&gpio 19 1>;
 180                 };
 181                 power {
 182                         label = "power";
 183                         gpios = <&gpio 28 1>;
 184                 };
 185                 lan1 {
 186                         label = "bt:green:lan1";
 187                         gpios = <&gpio 44 0>;
 188                 };
 189                 port1green {
 190                         label = "bt:green:port1";
 191                         gpios = <&gpio 45 0>;
 192                 };
 193                 port1orange {
 194                         label = "bt:orange:port1";
 195                         gpios = <&gpio 47 0>;
 196                 };
 197         };
 198 };