6 model = "VG3503J - BT OpenReach VDSL Modem";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
13 led-boot = &power_green;
14 led-failsafe = &power_red;
15 led-running = &power_green;
21 reg = <0x0 0x2000000>;
26 ranges = <0 0 0x0 0x3ffffff>;
28 compatible = "lantiq,nor";
30 reg = <0 0x0 0x2000000>;
35 compatible = "fixed-partitions";
41 reg = <0x00000 0x20000>;
46 reg = <0x20000 0x7d0000>;
51 reg = <0x7f0000 0x10000>;
57 gpio: pinmux@E100B10 {
58 pinctrl-names = "default";
59 pinctrl-0 = <&state_default>;
61 state_default: pinmux {
63 lantiq,groups = "mdio";
64 lantiq,function = "mdio";
67 lantiq,groups = "gphy0 led0", "gphy0 led1",
68 "gphy0 led2", "gphy1 led0",
69 "gphy1 led1", "gphy1 led2";
70 lantiq,function = "gphy";
72 lantiq,open-drain = <0>;
80 compatible = "lantiq,phy-xrx200";
81 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
82 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
87 compatible = "gpio-keys-polled";
90 poll-interval = <100>;
99 compatible = "gpio-leds";
102 label = "vg3503j:red:power";
103 gpios = <&gpio 14 1>;
106 label = "vg3503j:green:dsl";
107 gpios = <&gpio 19 1>;
110 label = "vg3503j:green:power";
111 gpios = <&gpio 28 1>;
112 default-state = "keep";
119 compatible = "lantiq,xrx200-pdi";
120 #address-cells = <1>;
126 compatible = "lantiq,xrx200-pdi-port";
129 phy-handle = <&phy11>;
132 compatible = "lantiq,xrx200-pdi-port";
135 phy-handle = <&phy13>;
140 #address-cells = <1>;
142 compatible = "lantiq,xrx200-mdio";
143 phy11: ethernet-phy@11 {
145 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
146 lantiq,led1h = <0x70>;
147 lantiq,led1l = <0x00>;
148 lantiq,led2h = <0x00>;
149 lantiq,led2l = <0x03>;
151 phy13: ethernet-phy@13 {
153 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
154 lantiq,led1h = <0x70>;
155 lantiq,led1l = <0x00>;
156 lantiq,led2h = <0x00>;
157 lantiq,led2l = <0x03>;