4 model = "VG3503J - BT OpenReach VDSL Modem";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
17 reg = <0x0 0x2000000>;
22 ranges = <0 0 0x0 0x3ffffff>;
24 compatible = "lantiq,nor";
26 reg = <0 0x0 0x2000000>;
32 reg = <0x00000 0x20000>;
37 reg = <0x20000 0x300000>;
42 reg = <0x320000 0x420000>;
47 reg = <0x740000 0x80000>;
51 label = "pri_bfocus_cfg";
52 reg = <0x7c0000 0x10000>;
56 label = "sec_bfocus_cfg";
57 reg = <0x7d0000 0x10000>;
62 reg = <0x7e0000 0x10000>;
67 reg = <0x7f0000 0x10000>;
72 gpio: pinmux@E100B10 {
73 pinctrl-names = "default";
74 pinctrl-0 = <&state_default>;
76 state_default: pinmux {
78 lantiq,groups = "mdio";
79 lantiq,function = "mdio";
82 lantiq,groups = "gphy0 led0", "gphy0 led1",
83 "gphy0 led2", "gphy1 led0",
84 "gphy1 led1", "gphy1 led2";
85 lantiq,function = "gphy";
87 lantiq,open-drain = <0>;
96 compatible = "lantiq,xrx200-net";
97 reg = < 0xE108000 0x3000 /* switch */
98 0xE10B100 0x70 /* mdio */
99 0xE10B1D8 0x30 /* mii */
100 0xE10B308 0x30 /* pmac */
102 interrupt-parent = <&icu0>;
103 interrupts = <73 72>;
106 compatible = "lantiq,xrx200-pdi";
107 #address-cells = <1>;
110 mac-address = [ 00 11 22 33 44 55 ];
113 compatible = "lantiq,xrx200-pdi-port";
116 phy-handle = <&phy11>;
119 compatible = "lantiq,xrx200-pdi-port";
122 phy-handle = <&phy13>;
127 #address-cells = <1>;
129 compatible = "lantiq,xrx200-mdio";
130 phy11: ethernet-phy@11 {
132 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
134 phy13: ethernet-phy@13 {
136 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
143 compatible = "gpio-keys-polled";
144 #address-cells = <1>;
146 poll-interval = <100>;
150 linux,code = <0x198>;
155 compatible = "gpio-leds";
159 gpios = <&gpio 14 1>;
162 label = "bt:green:dsl";
163 gpios = <&gpio 19 1>;
167 gpios = <&gpio 28 1>;