4 model = "VG3503J - BT OpenReach VDSL Modem";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 failsafe = &power_red;
12 running = &power_green;
19 reg = <0x0 0x2000000>;
24 ranges = <0 0 0x0 0x3ffffff>;
26 compatible = "lantiq,nor";
28 reg = <0 0x0 0x2000000>;
34 reg = <0x00000 0x20000>;
39 reg = <0x20000 0x300000>;
44 reg = <0x320000 0x420000>;
49 reg = <0x740000 0x80000>;
53 label = "pri_bfocus_cfg";
54 reg = <0x7c0000 0x10000>;
58 label = "sec_bfocus_cfg";
59 reg = <0x7d0000 0x10000>;
64 reg = <0x7e0000 0x10000>;
69 reg = <0x7f0000 0x10000>;
74 gpio: pinmux@E100B10 {
75 pinctrl-names = "default";
76 pinctrl-0 = <&state_default>;
78 state_default: pinmux {
80 lantiq,groups = "mdio";
81 lantiq,function = "mdio";
84 lantiq,groups = "gphy0 led0", "gphy0 led1",
85 "gphy0 led2", "gphy1 led0",
86 "gphy1 led1", "gphy1 led2";
87 lantiq,function = "gphy";
89 lantiq,open-drain = <0>;
97 compatible = "gpio-keys-polled";
100 poll-interval = <100>;
104 linux,code = <0x198>;
109 compatible = "gpio-leds";
112 label = "vg3503j:red:power";
113 gpios = <&gpio 14 1>;
116 label = "vg3503j:green:dsl";
117 gpios = <&gpio 19 1>;
120 label = "vg3503j:green:power";
121 gpios = <&gpio 28 1>;
122 default-state = "keep";
129 compatible = "lantiq,xrx200-pdi";
130 #address-cells = <1>;
133 mac-address = [ 00 11 22 33 44 55 ];
136 compatible = "lantiq,xrx200-pdi-port";
139 phy-handle = <&phy11>;
142 compatible = "lantiq,xrx200-pdi-port";
145 phy-handle = <&phy13>;
150 #address-cells = <1>;
152 compatible = "lantiq,xrx200-mdio";
153 phy11: ethernet-phy@11 {
155 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
156 lantiq,led1h = <0x70>;
157 lantiq,led1l = <0x00>;
158 lantiq,led2h = <0x00>;
159 lantiq,led2l = <0x03>;
161 phy13: ethernet-phy@13 {
163 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
164 lantiq,led1h = <0x70>;
165 lantiq,led1l = <0x00>;
166 lantiq,led2h = <0x00>;
167 lantiq,led2l = <0x03>;