3 #include <dt-bindings/input/input.h>
6 compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
9 bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
13 led-boot = &power_green;
14 led-failsafe = &power_red;
15 led-running = &power_green;
18 led-internet = &internet_green;
25 gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
26 &gpio 31 GPIO_ACTIVE_HIGH //still unknown
27 &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
32 reg = <0x0 0x4000000>;
38 compatible = "lantiq,nor";
40 reg = <0 0x0 0x1000000>;
45 compatible = "fixed-partitions";
49 boardconfig: partition@fe0000 {
50 label = "board_config";
51 reg = <0xfe0000 0x20000>;
58 gpio: pinmux@E100B10 {
59 pinctrl-names = "default";
60 pinctrl-0 = <&state_default>;
62 state_default: pinmux {
64 lantiq,groups = "gphy0 led0", "gphy0 led1",
65 "gphy1 led0", "gphy1 led1";
66 lantiq,function = "gphy";
67 lantiq,open-drain = <0>;
72 lantiq,groups = "mdio";
73 lantiq,function = "mdio";
77 lantiq,open-drain = <0>;
86 gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
95 compatible = "lantiq,phy-xrx200";
96 firmware1 = "lantiq/xrx200_phy22f_a14.bin"; /*VR9 1.1*/
97 firmware2 = "lantiq/xrx200_phy22f_a22.bin"; /*VR9 1.2*/
102 compatible = "gpio-keys-polled";
103 #address-cells = <1>;
105 poll-interval = <100>;
109 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
110 linux,code = <KEY_RESTART>;
115 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
116 linux,code = <KEY_WPS_BUTTON>;
121 compatible = "gpio-leds";
124 label = "vgv7510kw22:green:dsl";
125 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
129 label = "vgv7510kw22:red:internet";
130 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
134 label = "vgv7510kw22:red:info";
135 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
139 label = "vgv7510kw22:green:power";
140 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
141 default-state = "keep";
145 label = "vgv7510kw22:green:info";
146 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
149 internet_green: internet_green {
150 label = "vgv7510kw22:green:internet";
151 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
155 label = "vgv7510kw22:green:wlan";
156 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
160 label = "vgv7510kw22:red:power";
161 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
165 label = "vgv7510kw22:green:telefon";
166 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
173 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
176 compatible = "pci1814,3592";
177 reg = <0x7000 0 0 0 0>;
178 ralink,mtd-eeprom = <&boardconfig 0x410>;
179 ralink,mtd-eeprom-swap;
180 mtd-mac-address = <&boardconfig 0x16>;
181 mtd-mac-address-increment = <1>;
187 compatible = "lantiq,xrx200-pdi";
188 #address-cells = <1>;
191 mtd-mac-address = <&boardconfig 0x16>;
195 compatible = "lantiq,xrx200-pdi-port";
198 phy-handle = <&phy1>;
201 compatible = "lantiq,xrx200-pdi-port";
204 phy-handle = <&phy11>;
207 compatible = "lantiq,xrx200-pdi-port";
210 phy-handle = <&phy12>;
213 compatible = "lantiq,xrx200-pdi-port";
216 phy-handle = <&phy13>;
219 compatible = "lantiq,xrx200-pdi-port";
222 phy-handle = <&phy14>;
227 #address-cells = <1>;
229 compatible = "lantiq,xrx200-mdio";
231 phy1: ethernet-phy@1 {
233 compatible = "ethernet-phy-ieee802.3-c22";
236 phy11: ethernet-phy@11 {
238 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
240 phy12: ethernet-phy@12 {
242 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
244 phy13: ethernet-phy@13 {
246 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
248 phy14: ethernet-phy@14 {
250 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";