4 model = "VGV7510KW22 - o2 Box 6431";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 failsafe = &power_red;
12 running = &power_green;
15 internet = &internet_green;
21 reg = <0x0 0x4000000>;
27 compatible = "lantiq,nor";
29 reg = <0 0x0 0x1000000>;
34 compatible = "fixed-partitions";
38 boardconfig: partition@fe0000 {
39 label = "board_config";
40 reg = <0xfe0000 0x20000>;
47 gpio: pinmux@E100B10 {
48 pinctrl-names = "default";
49 pinctrl-0 = <&state_default>;
51 state_default: pinmux {
58 lantiq,groups = "gphy0 led1",
59 "gphy1 led0", "gphy1 led1";
60 lantiq,function = "gphy";
61 lantiq,open-drain = <0>;
66 lantiq,groups = "stp";
67 lantiq,function = "stp";
69 lantiq,open-drain = <0>;
73 lantiq,groups = "mdio";
74 lantiq,function = "mdio";
78 lantiq,open-drain = <0>;
83 lantiq,groups = "spi_di", "spi_do", "spi_clk";
84 lantiq,function = "spi";
90 compatible = "lantiq,gpio-stp-xway";
91 reg = <0xE100BB0 0x40>;
95 lantiq,shadow = <0xff>;
96 lantiq,groups = <0x1>;
99 lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */
104 gpios = <&gpio 47 0>;
109 lantiq,bus-clock = <33333333>;
110 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
112 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
114 gpio-reset = <&gpio 21 0>;
115 req-mask = <0x1>; /* GNT1 */
124 compatible = "lantiq,phy-xrx200";
125 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
126 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
131 compatible = "ralink,eeprom";
132 ralink,eeprom = "RT3062.eeprom";
136 compatible = "gpio-keys-polled";
137 #address-cells = <1>;
139 poll-interval = <100>;
144 linux,code = <0x198>;
150 linux,code = <0x211>;
155 compatible = "gpio-leds";
158 label = "vgv7510kw22:green:dsl";
163 label = "vgv7510kw22:red:internet";
164 gpios = <&gpio 10 1>;
168 label = "vgv7510kw22:red:info";
169 gpios = <&gpio 12 1>;
173 label = "vgv7510kw22:green:power";
174 gpios = <&gpio 14 1>;
175 default-state = "keep";
179 label = "vgv7510kw22:green:info";
180 gpios = <&gpio 15 1>;
183 internet_green: internet_green {
184 label = "vgv7510kw22:green:internet";
185 gpios = <&gpio 19 1>;
189 label = "vgv7510kw22:green:wlan";
190 gpios = <&gpio 20 1>;
194 label = "vgv7510kw22:red:power";
195 gpios = <&gpio 28 1>;
199 label = "vgv7510kw22:green:telefon";
200 gpios = <&gpio 29 1>;
207 compatible = "lantiq,xrx200-pdi";
208 #address-cells = <1>;
211 mtd-mac-address = <&boardconfig 0x16>;
215 compatible = "lantiq,xrx200-pdi-port";
218 phy-handle = <&phy11>;
221 compatible = "lantiq,xrx200-pdi-port";
224 phy-handle = <&phy12>;
227 compatible = "lantiq,xrx200-pdi-port";
230 phy-handle = <&phy13>;
233 compatible = "lantiq,xrx200-pdi-port";
236 phy-handle = <&phy14>;
241 #address-cells = <1>;
243 compatible = "lantiq,xrx200-mdio";
245 phy11: ethernet-phy@11 {
247 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
249 phy12: ethernet-phy@12 {
251 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
253 phy13: ethernet-phy@13 {
255 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
257 phy14: ethernet-phy@14 {
259 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";