5 model = "VGV7519 - KPN Experiabox V8";
8 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
12 reg = <0x0 0x4000000>;
18 compatible = "lantiq,fpi", "simple-bus";
19 ranges = <0x0 0x10000000 0xEEFFFFF>;
20 reg = <0x10000000 0xEF00000>;
25 compatible = "lantiq,localbus", "simple-bus";
28 gpio: pinmux@E100B10 {
29 compatible = "lantiq,pinctrl-xr9";
30 pinctrl-names = "default";
31 pinctrl-0 = <&state_default>;
33 interrupt-parent = <&icu0>;
34 interrupts = <166 135 66 40 41 42 38>;
38 reg = <0xE100B10 0xA0>;
40 state_default: pinmux {
42 lantiq,groups = "stp";
43 lantiq,function = "stp";
46 lantiq,groups = "spi", "spi_cs4";
47 lantiq,function = "spi";
50 lantiq,groups = "mdio";
51 lantiq,function = "mdio";
54 lantiq,pins = "io7", "io44";
59 lantiq,pins = "io4", "io5", "io6";
60 lantiq,open-drain = <0>;
66 lantiq,open-drain = <0>;
71 lantiq,groups = "gphy0 led1", "gphy1 led0";
72 lantiq,function = "gphy";
73 lantiq,open-drain = <0>;
81 compatible = "lantiq,xrx200-net";
82 reg = < 0xE108000 0x3000 /* switch */
83 0xE10B100 0x70 /* mdio */
84 0xE10B1D8 0x30 /* mii */
85 0xE10B308 0x30 /* pmac */
87 interrupt-parent = <&icu0>;
91 compatible = "lantiq,xrx200-pdi";
95 mac-address = [ 00 11 22 33 44 55 ];
98 compatible = "lantiq,xrx200-pdi-port";
101 phy-handle = <&phy0>;
104 compatible = "lantiq,xrx200-pdi-port";
107 phy-handle = <&phy1>;
110 compatible = "lantiq,xrx200-pdi-port";
113 phy-handle = <&phy11>;
116 compatible = "lantiq,xrx200-pdi-port";
119 phy-handle = <&phy13>;
124 compatible = "lantiq,xrx200-pdi";
125 #address-cells = <1>;
128 mac-address = [ 00 11 22 33 44 56 ];
131 compatible = "lantiq,xrx200-pdi-port";
134 phy-handle = <&phy5>;
139 #address-cells = <1>;
141 compatible = "lantiq,xrx200-mdio";
142 phy0: ethernet-phy@0 {
144 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
145 lantiq,c45-reg-init = <1 0 0 0>;
147 phy1: ethernet-phy@1 {
149 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
150 lantiq,c45-reg-init = <1 0 0 0>;
152 phy5: ethernet-phy@5 {
154 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
155 lantiq,c45-reg-init = <1 0 0 0>;
157 phy11: ethernet-phy@11 {
159 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
160 lantiq,c45-reg-init = <1 0 0 0>;
162 phy13: ethernet-phy@13 {
164 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
165 lantiq,c45-reg-init = <1 0 0 0>;
171 compatible = "lantiq,gpio-stp-xway";
172 reg = <0xE100BB0 0x40>;
176 lantiq,shadow = <0xffff>;
177 lantiq,groups = <0x3>;
186 gpios = <&gpio 32 0>;
187 lantiq,portmask = <0x3>;
191 #address-cells = <3>;
193 #interrupt-cells = <1>;
194 compatible = "lantiq,pci-xway1";
195 bus-range = <0x0 0x0>;
196 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
197 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
198 reg = <0x7000000 0x8000 /* config space */
199 0xE105400 0x400>; /* pci bridge */
200 lantiq,bus-clock = <33333333>;
201 /*lantiq,external-clock;*/
202 lantiq,delay-hi = <0>; /* 0ns delay */
203 lantiq,delay-lo = <0>; /* 0.0ns delay */
204 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
206 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
208 gpios-reset = <&gpio 21 0>;
209 req-mask = <0x1>; /* GNT1 */
214 compatible = "lantiq,phy-xrx200";
215 firmware = "lantiq/vr9_phy11g_a1x.bin";
220 compatible = "gpio-keys-polled";
221 #address-cells = <1>;
223 poll-interval = <100>;
227 linux,code = <0x198>;
231 gpios = <&gpio 41 1>;
236 gpios = <&gpio 45 1>;
241 gpios = <&gpio 10 1>;
242 linux,code = <0x211>;
247 compatible = "gpio-leds";
257 wps_yellow { /* yellow */
258 label = "wps_yellow";
269 internet_yellow { /* yellow */
270 label = "internet_yellow";
273 internet_red { /* red */
274 label = "internet_red";
277 broadband_red { /* red */
278 label = "broadband_red";
281 broadband_yellow { /* yellow */
282 label = "broadband_yellow";
289 wireless_red { /* red */
290 label = "wireless_red";
293 wireless_yellow { /* yellow */
294 label = "wireless_yellow";
297 power2 { /* yellow */
304 default-state = "on";