5 model = "VGV7519 - KPN Experiabox V8";
8 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
12 failsafe = &power_red;
13 running = &power_green;
15 dsl = &broadband_green;
16 internet = &internet_green;
17 wifi = &wireless_green;
22 reg = <0x0 0x4000000>;
28 compatible = "lantiq,nor";
30 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
35 compatible = "fixed-partitions";
39 boardconfig: partition@40000 {
40 label = "board_config";
41 reg = <0x40000 0x10000>;
48 gpio: pinmux@E100B10 {
49 pinctrl-names = "default";
50 pinctrl-0 = <&state_default>;
52 state_default: pinmux {
54 lantiq,groups = "stp";
55 lantiq,function = "stp";
56 lantiq,open-drain = <0>;
61 lantiq,groups = "mdio";
62 lantiq,function = "mdio";
66 lantiq,open-drain = <0>;
71 lantiq,groups = "gphy0 led1", "gphy1 led0";
72 lantiq,function = "gphy";
73 lantiq,open-drain = <0>;
81 compatible = "lantiq,gpio-stp-xway";
82 reg = <0xE100BB0 0x40>;
86 lantiq,shadow = <0xffff>;
87 lantiq,groups = <0x3>;
97 lantiq,portmask = <0x3>;
102 lantiq,bus-clock = <33333333>;
103 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
105 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
107 gpio-reset = <&gpio 21 0>;
108 req-mask = <0x1>; /* GNT1 */
117 compatible = "lantiq,phy-xrx200";
118 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
119 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
124 compatible = "ralink,eeprom";
125 ralink,eeprom = "RT2860.eeprom";
129 compatible = "gpio-keys-polled";
130 #address-cells = <1>;
132 poll-interval = <100>;
136 linux,code = <0x198>;
140 gpios = <&gpio 41 1>;
145 gpios = <&gpio 45 1>;
150 gpios = <&gpio 10 1>;
151 linux,code = <0x211>;
156 compatible = "gpio-leds";
159 label = "vgv7519:blue:eco";
163 label = "vgv7519:red:wps";
167 label = "vgv7519:green:wps";
171 label = "vgv7519:blue:upgrade";
175 label = "vgv7519:green:tv";
178 internet_green: internet_green {
179 label = "vgv7519:green:internet";
183 label = "vgv7519:red:internet";
187 label = "vgv7519:red:broadband";
190 broadband_green: broadband_green {
191 label = "vgv7519:green:broadband";
195 label = "vgv7519:green:voice";
199 label = "vgv7519:red:wireless";
202 wireless_green: wireless_green {
203 label = "vgv7519:green:wireless";
206 power_green: power2 {
207 label = "vgv7519:green:power";
209 default-state = "keep";
212 label = "vgv7519:red:power";
220 compatible = "lantiq,xrx200-pdi";
221 #address-cells = <1>;
224 mac-address = [ 00 11 22 33 44 55 ];
227 compatible = "lantiq,xrx200-pdi-port";
230 phy-handle = <&phy0>;
233 compatible = "lantiq,xrx200-pdi-port";
236 phy-handle = <&phy1>;
239 compatible = "lantiq,xrx200-pdi-port";
242 phy-handle = <&phy11>;
245 compatible = "lantiq,xrx200-pdi-port";
248 phy-handle = <&phy13>;
253 compatible = "lantiq,xrx200-pdi";
254 #address-cells = <1>;
257 mac-address = [ 00 11 22 33 44 56 ];
261 compatible = "lantiq,xrx200-pdi-port";
264 phy-handle = <&phy5>;
269 #address-cells = <1>;
271 compatible = "lantiq,xrx200-mdio";
272 phy0: ethernet-phy@0 {
274 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
276 phy1: ethernet-phy@1 {
278 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
280 phy5: ethernet-phy@5 {
282 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
284 phy11: ethernet-phy@11 {
286 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
288 phy13: ethernet-phy@13 {
290 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";