3 #include <dt-bindings/input/input.h>
7 model = "VGV7519 - KPN Experiabox V8";
10 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1";
14 led-boot = &power_green;
15 led-failsafe = &power_red;
16 led-running = &power_green;
18 led-dsl = &broadband_green;
19 led-internet = &internet_green;
20 led-wifi = &wireless_green;
26 gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
27 &gpio 31 GPIO_ACTIVE_HIGH //still unknown
28 &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
33 reg = <0x0 0x4000000>;
39 compatible = "lantiq,nor";
41 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
46 compatible = "fixed-partitions";
50 boardconfig: partition@40000 {
51 label = "board_config";
52 reg = <0x40000 0x10000>;
59 gpio: pinmux@E100B10 {
60 pinctrl-names = "default";
61 pinctrl-0 = <&state_default>;
63 state_default: pinmux {
65 lantiq,groups = "stp";
66 lantiq,function = "stp";
67 lantiq,open-drain = <0>;
72 lantiq,groups = "mdio";
73 lantiq,function = "mdio";
77 lantiq,open-drain = <0>;
82 lantiq,groups = "gphy0 led1", "gphy1 led0";
83 lantiq,function = "gphy";
84 lantiq,open-drain = <0>;
92 compatible = "lantiq,gpio-stp-xway";
93 reg = <0xE100BB0 0x40>;
97 lantiq,shadow = <0xffff>;
98 lantiq,groups = <0x3>;
107 gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
108 lantiq,portmask = <0x3>;
113 gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
122 compatible = "lantiq,phy-xrx200";
123 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
124 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
129 compatible = "gpio-keys-polled";
130 #address-cells = <1>;
132 poll-interval = <100>;
135 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
136 linux,code = <KEY_RESTART>;
140 gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
141 linux,code = <KEY_RFKILL>;
145 gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
146 linux,code = <KEY_RFKILL>;
150 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
151 linux,code = <KEY_WPS_BUTTON>;
156 compatible = "gpio-leds";
159 label = "vgv7519:blue:eco";
160 gpios = <&stp 2 GPIO_ACTIVE_LOW>;
163 label = "vgv7519:red:wps";
164 gpios = <&stp 3 GPIO_ACTIVE_LOW>;
167 label = "vgv7519:green:wps";
168 gpios = <&stp 4 GPIO_ACTIVE_LOW>;
171 label = "vgv7519:blue:upgrade";
172 gpios = <&stp 5 GPIO_ACTIVE_LOW>;
175 label = "vgv7519:green:tv";
176 gpios = <&stp 6 GPIO_ACTIVE_LOW>;
178 internet_green: internet_green {
179 label = "vgv7519:green:internet";
180 gpios = <&stp 7 GPIO_ACTIVE_LOW>;
183 label = "vgv7519:red:internet";
184 gpios = <&stp 8 GPIO_ACTIVE_LOW>;
187 label = "vgv7519:red:broadband";
188 gpios = <&stp 9 GPIO_ACTIVE_LOW>;
190 broadband_green: broadband_green {
191 label = "vgv7519:green:broadband";
192 gpios = <&stp 10 GPIO_ACTIVE_LOW>;
195 label = "vgv7519:green:voice";
196 gpios = <&stp 11 GPIO_ACTIVE_LOW>;
199 label = "vgv7519:red:wireless";
200 gpios = <&stp 12 GPIO_ACTIVE_LOW>;
202 wireless_green: wireless_green {
203 label = "vgv7519:green:wireless";
204 gpios = <&stp 13 GPIO_ACTIVE_LOW>;
206 power_green: power2 {
207 label = "vgv7519:green:power";
208 gpios = <&stp 14 GPIO_ACTIVE_LOW>;
209 default-state = "keep";
212 label = "vgv7519:red:power";
213 gpios = <&stp 15 GPIO_ACTIVE_LOW>;
220 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
223 compatible = "pci1814,3091";
224 reg = <0x7000 0 0 0 0>;
225 ralink,mtd-eeprom = <&boardconfig 0x410>;
226 ralink,mtd-eeprom-swap;
227 mtd-mac-address = <&boardconfig 0x16>;
228 mtd-mac-address-increment = <1>;
234 compatible = "lantiq,xrx200-pdi";
235 #address-cells = <1>;
238 mtd-mac-address = <&boardconfig 0x16>;
239 mtd-mac-address-increment = <1>;
243 compatible = "lantiq,xrx200-pdi-port";
246 phy-handle = <&phy0>;
249 compatible = "lantiq,xrx200-pdi-port";
252 phy-handle = <&phy1>;
255 compatible = "lantiq,xrx200-pdi-port";
258 phy-handle = <&phy11>;
261 compatible = "lantiq,xrx200-pdi-port";
264 phy-handle = <&phy13>;
269 compatible = "lantiq,xrx200-pdi";
270 #address-cells = <1>;
273 mtd-mac-address = <&boardconfig 0x16>;
277 compatible = "lantiq,xrx200-pdi-port";
280 phy-handle = <&phy5>;
285 #address-cells = <1>;
287 compatible = "lantiq,xrx200-mdio";
288 phy0: ethernet-phy@0 {
290 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
292 phy1: ethernet-phy@1 {
294 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
296 phy5: ethernet-phy@5 {
298 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
300 phy11: ethernet-phy@11 {
302 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
304 phy13: ethernet-phy@13 {
306 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";