5 model = "VGV7519 - KPN Experiabox V8";
8 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
12 reg = <0x0 0x4000000>;
18 compatible = "lantiq,fpi", "simple-bus";
19 ranges = <0x0 0x10000000 0xEEFFFFF>;
20 reg = <0x10000000 0xEF00000>;
25 compatible = "lantiq,localbus", "simple-bus";
28 gpio: pinmux@E100B10 {
29 compatible = "lantiq,pinctrl-xr9";
30 pinctrl-names = "default";
31 pinctrl-0 = <&state_default>;
33 interrupt-parent = <&icu0>;
34 interrupts = <166 135 66 40 41 42 38>;
38 reg = <0xE100B10 0xA0>;
40 state_default: pinmux {
42 lantiq,groups = "exin3";
43 lantiq,function = "exin";
46 lantiq,groups = "stp";
47 lantiq,function = "stp";
50 lantiq,groups = "spi", "spi_cs4";
51 lantiq,function = "spi";
54 lantiq,groups = "mdio";
55 lantiq,function = "mdio";
58 lantiq,pins = "io7", "io44";
63 lantiq,pins = "io4", "io5", "io6", /* stp */
71 lantiq,groups = "gphy0 led1", "gphy1 led0";
72 lantiq,function = "gphy";
73 lantiq,open-drain = <0>;
81 lantiq,pins = "io39"; /* exin3 */
90 compatible = "lantiq,xrx200-net";
91 reg = < 0xE108000 0x3000 /* switch */
92 0xE10B100 0x70 /* mdio */
93 0xE10B1D8 0x30 /* mii */
94 0xE10B308 0x30 /* pmac */
96 interrupt-parent = <&icu0>;
100 compatible = "lantiq,xrx200-pdi";
101 #address-cells = <1>;
104 mac-address = [ 00 11 22 33 44 55 ];
107 compatible = "lantiq,xrx200-pdi-port";
110 phy-handle = <&phy0>;
113 compatible = "lantiq,xrx200-pdi-port";
116 phy-handle = <&phy1>;
119 compatible = "lantiq,xrx200-pdi-port";
122 phy-handle = <&phy11>;
125 compatible = "lantiq,xrx200-pdi-port";
128 phy-handle = <&phy13>;
133 compatible = "lantiq,xrx200-pdi";
134 #address-cells = <1>;
137 mac-address = [ 00 11 22 33 44 56 ];
140 compatible = "lantiq,xrx200-pdi-port";
143 phy-handle = <&phy5>;
148 #address-cells = <1>;
150 compatible = "lantiq,xrx200-mdio";
151 phy0: ethernet-phy@0 {
153 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
154 lantiq,c45-reg-init = <1 0 0 0>;
156 phy1: ethernet-phy@1 {
158 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
159 lantiq,c45-reg-init = <1 0 0 0>;
161 phy5: ethernet-phy@5 {
163 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
164 lantiq,c45-reg-init = <1 0 0 0>;
166 phy11: ethernet-phy@11 {
168 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
169 lantiq,c45-reg-init = <1 0 0 0>;
171 phy13: ethernet-phy@13 {
173 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
174 lantiq,c45-reg-init = <1 0 0 0>;
180 compatible = "lantiq,gpio-stp-xway";
181 reg = <0xE100BB0 0x40>;
185 lantiq,shadow = <0xffff>;
186 lantiq,groups = <0x3>;
195 gpios = <&gpio 32 0>;
196 lantiq,portmask = <0x3>;
200 #address-cells = <3>;
202 #interrupt-cells = <1>;
203 compatible = "lantiq,pci-xway1";
204 bus-range = <0x0 0x0>;
205 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
206 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
207 reg = <0x7000000 0x8000 /* config space */
208 0xE105400 0x400>; /* pci bridge */
209 lantiq,bus-clock = <33333333>;
210 /*lantiq,external-clock;*/
211 lantiq,delay-hi = <0>; /* 0ns delay */
212 lantiq,delay-lo = <0>; /* 0.0ns delay */
213 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
215 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
217 gpios-reset = <&gpio 21 0>;
218 req-mask = <0x1>; /* GNT1 */
223 compatible = "lantiq,phy-xrx200";
224 firmware = "lantiq/vr9_phy11g_a1x.bin";
229 compatible = "gpio-keys-polled";
230 #address-cells = <1>;
232 poll-interval = <100>;
236 linux,code = <0x198>;
240 gpios = <&gpio 41 1>;
245 gpios = <&gpio 45 1>;
250 gpios = <&gpio 10 1>;
251 linux,code = <0x211>;
256 compatible = "gpio-leds";
266 wps_yellow { /* yellow */
267 label = "wps_yellow";
278 internet_yellow { /* yellow */
279 label = "internet_yellow";
282 internet_red { /* red */
283 label = "internet_red";
286 broadband_red { /* red */
287 label = "broadband_red";
290 broadband_yellow { /* yellow */
291 label = "broadband_yellow";
298 wireless_red { /* red */
299 label = "wireless_red";
302 wireless_yellow { /* yellow */
303 label = "wireless_yellow";
306 power2 { /* yellow */
313 default-state = "on";