3 #include <dt-bindings/input/input.h>
7 model = "VGV7519 - KPN Experiabox V8";
10 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
14 led-boot = &power_green;
15 led-failsafe = &power_red;
16 led-running = &power_green;
18 led-dsl = &broadband_green;
19 led-internet = &internet_green;
20 led-wifi = &wireless_green;
24 reg = <0x0 0x4000000>;
30 compatible = "lantiq,nor";
32 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
37 compatible = "fixed-partitions";
41 boardconfig: partition@40000 {
42 label = "board_config";
43 reg = <0x40000 0x10000>;
50 gpio: pinmux@E100B10 {
51 pinctrl-names = "default";
52 pinctrl-0 = <&state_default>;
54 state_default: pinmux {
56 lantiq,groups = "stp";
57 lantiq,function = "stp";
58 lantiq,open-drain = <0>;
63 lantiq,groups = "mdio";
64 lantiq,function = "mdio";
68 lantiq,open-drain = <0>;
73 lantiq,groups = "gphy0 led1", "gphy1 led0";
74 lantiq,function = "gphy";
75 lantiq,open-drain = <0>;
83 compatible = "lantiq,gpio-stp-xway";
84 reg = <0xE100BB0 0x40>;
88 lantiq,shadow = <0xffff>;
89 lantiq,groups = <0x3>;
98 gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
99 lantiq,portmask = <0x3>;
104 gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
113 compatible = "lantiq,phy-xrx200";
114 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
115 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
120 compatible = "gpio-keys-polled";
121 #address-cells = <1>;
123 poll-interval = <100>;
126 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
127 linux,code = <KEY_RESTART>;
131 gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
132 linux,code = <KEY_RFKILL>;
136 gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
137 linux,code = <KEY_RFKILL>;
141 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
142 linux,code = <KEY_WPS_BUTTON>;
147 compatible = "gpio-leds";
150 label = "vgv7519:blue:eco";
151 gpios = <&stp 2 GPIO_ACTIVE_LOW>;
154 label = "vgv7519:red:wps";
155 gpios = <&stp 3 GPIO_ACTIVE_LOW>;
158 label = "vgv7519:green:wps";
159 gpios = <&stp 4 GPIO_ACTIVE_LOW>;
162 label = "vgv7519:blue:upgrade";
163 gpios = <&stp 5 GPIO_ACTIVE_LOW>;
166 label = "vgv7519:green:tv";
167 gpios = <&stp 6 GPIO_ACTIVE_LOW>;
169 internet_green: internet_green {
170 label = "vgv7519:green:internet";
171 gpios = <&stp 7 GPIO_ACTIVE_LOW>;
174 label = "vgv7519:red:internet";
175 gpios = <&stp 8 GPIO_ACTIVE_LOW>;
178 label = "vgv7519:red:broadband";
179 gpios = <&stp 9 GPIO_ACTIVE_LOW>;
181 broadband_green: broadband_green {
182 label = "vgv7519:green:broadband";
183 gpios = <&stp 10 GPIO_ACTIVE_LOW>;
186 label = "vgv7519:green:voice";
187 gpios = <&stp 11 GPIO_ACTIVE_LOW>;
190 label = "vgv7519:red:wireless";
191 gpios = <&stp 12 GPIO_ACTIVE_LOW>;
193 wireless_green: wireless_green {
194 label = "vgv7519:green:wireless";
195 gpios = <&stp 13 GPIO_ACTIVE_LOW>;
197 power_green: power2 {
198 label = "vgv7519:green:power";
199 gpios = <&stp 14 GPIO_ACTIVE_LOW>;
200 default-state = "keep";
203 label = "vgv7519:red:power";
204 gpios = <&stp 15 GPIO_ACTIVE_LOW>;
211 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
214 compatible = "pci1814,3091";
215 reg = <0x7000 0 0 0 0>;
216 ralink,mtd-eeprom = <&boardconfig 0x410>;
217 ralink,mtd-eeprom-swap;
218 mtd-mac-address = <&boardconfig 0x16>;
219 mtd-mac-address-increment = <1>;
225 compatible = "lantiq,xrx200-pdi";
226 #address-cells = <1>;
229 mtd-mac-address = <&boardconfig 0x16>;
230 mtd-mac-address-increment = <1>;
234 compatible = "lantiq,xrx200-pdi-port";
237 phy-handle = <&phy0>;
240 compatible = "lantiq,xrx200-pdi-port";
243 phy-handle = <&phy1>;
246 compatible = "lantiq,xrx200-pdi-port";
249 phy-handle = <&phy11>;
252 compatible = "lantiq,xrx200-pdi-port";
255 phy-handle = <&phy13>;
260 compatible = "lantiq,xrx200-pdi";
261 #address-cells = <1>;
264 mtd-mac-address = <&boardconfig 0x16>;
268 compatible = "lantiq,xrx200-pdi-port";
271 phy-handle = <&phy5>;
276 #address-cells = <1>;
278 compatible = "lantiq,xrx200-mdio";
279 phy0: ethernet-phy@0 {
281 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
283 phy1: ethernet-phy@1 {
285 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
287 phy5: ethernet-phy@5 {
289 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
291 phy11: ethernet-phy@11 {
293 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
295 phy13: ethernet-phy@13 {
297 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";