5 model = "VGV7519 - KPN Experiabox V8";
8 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
12 led-boot = &power_green;
13 led-failsafe = &power_red;
14 led-running = &power_green;
16 led-dsl = &broadband_green;
17 led-internet = &internet_green;
18 led-wifi = &wireless_green;
22 reg = <0x0 0x4000000>;
28 compatible = "lantiq,nor";
30 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
35 compatible = "fixed-partitions";
39 boardconfig: partition@40000 {
40 label = "board_config";
41 reg = <0x40000 0x10000>;
48 gpio: pinmux@E100B10 {
49 pinctrl-names = "default";
50 pinctrl-0 = <&state_default>;
52 state_default: pinmux {
54 lantiq,groups = "stp";
55 lantiq,function = "stp";
56 lantiq,open-drain = <0>;
61 lantiq,groups = "mdio";
62 lantiq,function = "mdio";
66 lantiq,open-drain = <0>;
71 lantiq,groups = "gphy0 led1", "gphy1 led0";
72 lantiq,function = "gphy";
73 lantiq,open-drain = <0>;
81 compatible = "lantiq,gpio-stp-xway";
82 reg = <0xE100BB0 0x40>;
86 lantiq,shadow = <0xffff>;
87 lantiq,groups = <0x3>;
96 gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
97 lantiq,portmask = <0x3>;
102 gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
111 compatible = "lantiq,phy-xrx200";
112 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
113 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
118 compatible = "gpio-keys-polled";
119 #address-cells = <1>;
121 poll-interval = <100>;
124 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
125 linux,code = <KEY_RESTART>;
129 gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
130 linux,code = <KEY_RFKILL>;
134 gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
135 linux,code = <KEY_RFKILL>;
139 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
140 linux,code = <KEY_WPS_BUTTON>;
145 compatible = "gpio-leds";
148 label = "vgv7519:blue:eco";
149 gpios = <&stp 2 GPIO_ACTIVE_LOW>;
152 label = "vgv7519:red:wps";
153 gpios = <&stp 3 GPIO_ACTIVE_LOW>;
156 label = "vgv7519:green:wps";
157 gpios = <&stp 4 GPIO_ACTIVE_LOW>;
160 label = "vgv7519:blue:upgrade";
161 gpios = <&stp 5 GPIO_ACTIVE_LOW>;
164 label = "vgv7519:green:tv";
165 gpios = <&stp 6 GPIO_ACTIVE_LOW>;
167 internet_green: internet_green {
168 label = "vgv7519:green:internet";
169 gpios = <&stp 7 GPIO_ACTIVE_LOW>;
172 label = "vgv7519:red:internet";
173 gpios = <&stp 8 GPIO_ACTIVE_LOW>;
176 label = "vgv7519:red:broadband";
177 gpios = <&stp 9 GPIO_ACTIVE_LOW>;
179 broadband_green: broadband_green {
180 label = "vgv7519:green:broadband";
181 gpios = <&stp 10 GPIO_ACTIVE_LOW>;
184 label = "vgv7519:green:voice";
185 gpios = <&stp 11 GPIO_ACTIVE_LOW>;
188 label = "vgv7519:red:wireless";
189 gpios = <&stp 12 GPIO_ACTIVE_LOW>;
191 wireless_green: wireless_green {
192 label = "vgv7519:green:wireless";
193 gpios = <&stp 13 GPIO_ACTIVE_LOW>;
195 power_green: power2 {
196 label = "vgv7519:green:power";
197 gpios = <&stp 14 GPIO_ACTIVE_LOW>;
198 default-state = "keep";
201 label = "vgv7519:red:power";
202 gpios = <&stp 15 GPIO_ACTIVE_LOW>;
209 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
212 compatible = "pci1814,3091";
213 reg = <0x7000 0 0 0 0>;
214 ralink,mtd-eeprom = <&boardconfig 0x410>;
215 ralink,mtd-eeprom-swap;
216 mtd-mac-address = <&boardconfig 0x16>;
217 mtd-mac-address-increment = <1>;
223 compatible = "lantiq,xrx200-pdi";
224 #address-cells = <1>;
227 mtd-mac-address = <&boardconfig 0x16>;
228 mtd-mac-address-increment = <1>;
232 compatible = "lantiq,xrx200-pdi-port";
235 phy-handle = <&phy0>;
238 compatible = "lantiq,xrx200-pdi-port";
241 phy-handle = <&phy1>;
244 compatible = "lantiq,xrx200-pdi-port";
247 phy-handle = <&phy11>;
250 compatible = "lantiq,xrx200-pdi-port";
253 phy-handle = <&phy13>;
258 compatible = "lantiq,xrx200-pdi";
259 #address-cells = <1>;
262 mtd-mac-address = <&boardconfig 0x16>;
266 compatible = "lantiq,xrx200-pdi-port";
269 phy-handle = <&phy5>;
274 #address-cells = <1>;
276 compatible = "lantiq,xrx200-mdio";
277 phy0: ethernet-phy@0 {
279 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
281 phy1: ethernet-phy@1 {
283 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
285 phy5: ethernet-phy@5 {
287 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
289 phy11: ethernet-phy@11 {
291 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
293 phy13: ethernet-phy@13 {
295 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";