5 model = "VGV7519 - KPN Experiabox V8";
8 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
12 failsafe = &power_red;
13 running = &power_green;
15 dsl = &broadband_green;
16 internet = &internet_green;
17 wifi = &wireless_green;
22 reg = <0x0 0x4000000>;
28 compatible = "lantiq,fpi", "simple-bus";
29 ranges = <0x0 0x10000000 0xEEFFFFF>;
30 reg = <0x10000000 0xEF00000>;
35 compatible = "lantiq,localbus", "simple-bus";
38 gpio: pinmux@E100B10 {
39 compatible = "lantiq,pinctrl-xr9";
40 pinctrl-names = "default";
41 pinctrl-0 = <&state_default>;
43 interrupt-parent = <&icu0>;
44 interrupts = <166 135 66 40 41 42 38>;
48 reg = <0xE100B10 0xA0>;
50 state_default: pinmux {
52 lantiq,groups = "stp";
53 lantiq,function = "stp";
56 lantiq,groups = "spi_di", "spi_do", "spi_clk";
57 lantiq,function = "spi";
60 lantiq,groups = "mdio";
61 lantiq,function = "mdio";
64 lantiq,pins = "io7", "io44";
69 lantiq,pins = "io4", "io5", "io6";
70 lantiq,open-drain = <0>;
76 lantiq,open-drain = <0>;
81 lantiq,groups = "gphy0 led1", "gphy1 led0";
82 lantiq,function = "gphy";
83 lantiq,open-drain = <0>;
91 compatible = "lantiq,gpio-stp-xway";
92 reg = <0xE100BB0 0x40>;
96 lantiq,shadow = <0xffff>;
97 lantiq,groups = <0x3>;
106 gpios = <&gpio 32 0>;
107 lantiq,portmask = <0x3>;
112 #address-cells = <3>;
114 #interrupt-cells = <1>;
115 compatible = "lantiq,pci-xway";
116 bus-range = <0x0 0x0>;
117 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
118 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
119 reg = <0x7000000 0x8000 /* config space */
120 0xE105400 0x400>; /* pci bridge */
121 lantiq,bus-clock = <33333333>;
122 /*lantiq,external-clock;*/
123 lantiq,delay-hi = <0>; /* 0ns delay */
124 lantiq,delay-lo = <0>; /* 0.0ns delay */
125 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
127 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
129 gpio-reset = <&gpio 21 0>;
130 req-mask = <0x1>; /* GNT1 */
139 compatible = "lantiq,phy-xrx200";
140 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
141 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
146 compatible = "ralink,eeprom";
147 ralink,eeprom = "RT2860.eeprom";
151 compatible = "gpio-keys-polled";
152 #address-cells = <1>;
154 poll-interval = <100>;
158 linux,code = <0x198>;
162 gpios = <&gpio 41 1>;
167 gpios = <&gpio 45 1>;
172 gpios = <&gpio 10 1>;
173 linux,code = <0x211>;
178 compatible = "gpio-leds";
181 label = "vgv7519:blue:eco";
185 label = "vgv7519:red:wps";
189 label = "vgv7519:green:wps";
193 label = "vgv7519:blue:upgrade";
197 label = "vgv7519:green:tv";
200 internet_green: internet_green {
201 label = "vgv7519:green:internet";
205 label = "vgv7519:red:internet";
209 label = "vgv7519:red:broadband";
212 broadband_green: broadband_green {
213 label = "vgv7519:green:broadband";
217 label = "vgv7519:green:voice";
221 label = "vgv7519:red:wireless";
224 wireless_green: wireless_green {
225 label = "vgv7519:green:wireless";
228 power_green: power2 {
229 label = "vgv7519:green:power";
231 default-state = "keep";
234 label = "vgv7519:red:power";
242 compatible = "lantiq,xrx200-pdi";
243 #address-cells = <1>;
246 mac-address = [ 00 11 22 33 44 55 ];
249 compatible = "lantiq,xrx200-pdi-port";
252 phy-handle = <&phy0>;
255 compatible = "lantiq,xrx200-pdi-port";
258 phy-handle = <&phy1>;
261 compatible = "lantiq,xrx200-pdi-port";
264 phy-handle = <&phy11>;
267 compatible = "lantiq,xrx200-pdi-port";
270 phy-handle = <&phy13>;
275 compatible = "lantiq,xrx200-pdi";
276 #address-cells = <1>;
279 mac-address = [ 00 11 22 33 44 56 ];
282 compatible = "lantiq,xrx200-pdi-port";
285 phy-handle = <&phy5>;
290 #address-cells = <1>;
292 compatible = "lantiq,xrx200-mdio";
293 phy0: ethernet-phy@0 {
295 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
296 lantiq,c45-reg-init = <1 0 0 0>;
298 phy1: ethernet-phy@1 {
300 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
301 lantiq,c45-reg-init = <1 0 0 0>;
303 phy5: ethernet-phy@5 {
305 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
306 lantiq,c45-reg-init = <1 0 0 0>;
308 phy11: ethernet-phy@11 {
310 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
311 lantiq,c45-reg-init = <1 0 0 0>;
313 phy13: ethernet-phy@13 {
315 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
316 lantiq,c45-reg-init = <1 0 0 0>;