5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube";
9 model = "Speedport W501V Typ A";
12 bootargs = "console=ttyLTQ0,115200";
16 /* we dont have a power led, lets use the online led */
18 led-failsafe = &online;
21 led-internet = &online;
26 reg = <0x0 0x2000000>;
30 compatible = "ath5k,eeprom";
31 ath,eep-flash = <&boardconfig 0x400>;
32 ath,mac-offset = <0x0>;
37 compatible = "gpio-keys-polled";
40 poll-interval = <100>;
44 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_WPS_BUTTON>;
49 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_RESTART>;
55 compatible = "gpio-leds";
57 label = "arv4525pw:green:festnetz";
58 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
61 label = "arv4525pw:green:internet";
62 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
65 label = "arv4525pw:green:t-dsl";
66 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
69 label = "arv4525pw:green:wlan";
70 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
73 label = "arv4525pw:green:online";
74 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
80 pinctrl-names = "default";
81 pinctrl-0 = <&state_default>;
83 state_default: pinmux {
85 lantiq,groups = "req1";
86 lantiq,function = "pci";
87 lantiq,open-drain = <1>;
92 lantiq,groups = "gnt1";
93 lantiq,function = "pci";
102 lantiq,pins = "io31";
108 /* #define ARV4525PW_PHYRESET 13 */
111 mtd-mac-address = <&boardconfig 0x16>;
116 compatible = "lantiq,nor";
118 reg = <0 0x0 0x2000000>;
119 #address-cells = <1>;
123 compatible = "fixed-partitions";
124 #address-cells = <1>;
129 reg = <0x00000 0x10000>;
135 reg = <0x10000 0x10000>;
141 reg = <0x20000 0x3d0000>;
144 boardconfig: partition@400000 {
145 label = "boardconfig";
146 reg = <0x3f0000 0x10000>;
155 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
158 /* #define ARV4525PW_RELAY 31 */
161 gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;