5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube";
9 model = "Speedport W501V Typ A";
12 bootargs = "console=ttyLTQ0,115200";
16 /* we dont have a power led, lets use the online led */
18 led-failsafe = &online;
21 led-internet = &online;
26 device_type = "memory";
27 reg = <0x0 0x2000000>;
31 compatible = "ath5k,eeprom";
32 ath,eep-flash = <&boardconfig 0x400>;
33 ath,mac-offset = <0x0>;
38 compatible = "gpio-keys-polled";
39 poll-interval = <100>;
43 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_WPS_BUTTON>;
48 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_RESTART>;
54 compatible = "gpio-leds";
56 label = "arv4525pw:green:festnetz";
57 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
60 label = "arv4525pw:green:internet";
61 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
64 label = "arv4525pw:green:t-dsl";
65 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
68 label = "arv4525pw:green:wlan";
69 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
72 label = "arv4525pw:green:online";
73 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
79 pinctrl-names = "default";
80 pinctrl-0 = <&state_default>;
82 state_default: pinmux {
84 lantiq,groups = "req1";
85 lantiq,function = "pci";
86 lantiq,open-drain = <1>;
91 lantiq,groups = "gnt1";
92 lantiq,function = "pci";
101 lantiq,pins = "io31";
107 /* #define ARV4525PW_PHYRESET 13 */
110 mtd-mac-address = <&boardconfig 0x16>;
115 compatible = "lantiq,nor";
117 reg = <0 0x0 0x2000000>;
120 compatible = "fixed-partitions";
121 #address-cells = <1>;
126 reg = <0x00000 0x10000>;
132 reg = <0x10000 0x10000>;
138 reg = <0x20000 0x3d0000>;
141 boardconfig: partition@400000 {
142 label = "boardconfig";
143 reg = <0x3f0000 0x10000>;
152 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
155 /* #define ARV4525PW_RELAY 31 */
158 gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;