5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_blue;
17 led-failsafe = &power_red;
18 led-running = &power_blue;
19 led-upgrade = &power_blue;
27 device_type = "memory";
28 reg = <0x0 0x2000000>;
32 compatible = "ath5k,eeprom";
33 ath,eep-flash = <&boardconfig 0x400>;
34 ath,mac-offset = <0x0>;
39 compatible = "gpio-keys-polled";
42 poll-interval = <100>;
46 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
47 linux,code = <KEY_RFKILL>;
51 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
52 linux,code = <KEY_WPS_BUTTON>;
56 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_RESTART>;
62 compatible = "gpio-leds";
64 label = "arv452cqw:blue:power";
65 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
66 default-state = "keep";
69 label = "arv452cqw:blue:dsl";
70 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
73 label = "arv452cqw:blue:isdn";
74 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
77 label = "arv452cqw:red:power";
78 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
81 label = "arv452cqw:blue:wps";
82 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
85 label = "arv452cqw:yellow:wps";
86 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
89 label = "arv452cqw:blue:telefon1";
90 gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
93 label = "arv452cqw:blue:telefon2";
94 gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
97 label = "arv452cqw:red:wps";
98 gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
101 label = "arv452cqw:blue:line";
102 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
105 label = "arv452cqw:blue:sprache";
106 gpios = <&gpiomm 4 1>;
109 label = "arv452cqw:blue:usb";
110 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
113 label = "arv452cqw:blue:wlan";
114 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
117 internet blue and internet red are missing
118 dsl2 and dsl3 are not referenced in manual
121 label = "arv452cqw:yellow:dsl";
122 gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
125 label = "arv452cqw:red:dsl";
126 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
130 usb_vbus: regulator-usb-vbus {
131 compatible = "regulator-fixed";
133 regulator-name = "USB_VBUS";
135 regulator-min-microvolt = <5000000>;
136 regulator-max-microvolt = <5000000>;
138 gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
144 pinctrl-names = "default";
145 pinctrl-0 = <&state_default>;
147 state_default: pinmux {
149 lantiq,groups = "ebu cs1";
150 lantiq,function = "ebu";
153 lantiq,groups = "req1";
154 lantiq,function = "pci";
155 lantiq,open-drain = <1>;
160 lantiq,groups = "gnt1";
161 lantiq,function = "pci";
165 lantiq,pins = "io21";
170 lantiq,pins = "io3", "io5", "io6", "io7", "io9";
178 lantiq,shadow = <0x77f>;
182 #define ARV452CPW_SWITCH_RESET 110
186 mtd-mac-address = <&boardconfig 0x16>;
191 compatible = "lantiq,nor";
193 reg = <0 0x0 0x400000>;
194 #address-cells = <1>;
198 compatible = "fixed-partitions";
199 #address-cells = <1>;
204 reg = <0x00000 0x10000>;
210 reg = <0x10000 0x10000>;
216 reg = <0x20000 0x3d0000>;
219 boardconfig: partition@3f0000 {
220 label = "boardconfig";
221 reg = <0x3f0000 0x10000>;
230 lantiq,external-clock;
231 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
240 vbus-supply = <&usb_vbus>;
245 gpios = <&gpio 31 GPIO_ACTIVE_HIGH
246 &gpiomm 7 GPIO_ACTIVE_HIGH>;