5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
9 model = "Alice/O2 IAD 4421";
12 bootargs = "console=ttyLTQ0,115200";
17 led-failsafe = &power_red;
22 led-internet = &internet;
27 reg = <0x0 0x4000000>;
31 compatible = "gpio-keys-polled";
34 poll-interval = <100>;
38 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_RFKILL>;
43 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RESTART>;
49 compatible = "gpio-leds";
51 label = "arv7506pw11:green:wlan";
52 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
55 label = "arv7506pw11:green:power";
56 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
57 default-state = "keep";
60 label = "arv7506pw11:green:dsl";
61 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
64 label = "arv7506pw11:green:internet";
65 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
67 power_red: power_red {
68 label = "arv7506pw11:red:power";
69 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
72 label = "arv7506pw11:red:internet";
73 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
76 label = "arv7506pw11:green:info";
77 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
80 label = "arv7506pw11:green:telefon";
81 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
84 label = "arv7506pw11:red:info";
85 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
91 pinctrl-names = "default";
92 pinctrl-0 = <&state_default>;
94 state_default: pinmux {
96 lantiq,groups = "gnt1";
97 lantiq,function = "pci";
101 lantiq,pins = "io21";
108 /* GPIO 19: switch reset */
111 mtd-mac-address = <&boardconfig 0x16>;
116 compatible = "lantiq,nor";
118 reg = <0 0x0 0x800000>;
121 compatible = "fixed-partitions";
122 #address-cells = <1>;
127 reg = <0x00000 0x40000>;
133 reg = <0x40000 0x10000>;
139 reg = <0x50000 0x7a0000>;
142 boardconfig: partition@7f0000 {
143 label = "board_config";
144 reg = <0x7f0000 0x10000>;
153 lantiq,external-clock;
154 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
157 compatible = "pci1814,3592";
158 reg = <0x7000 0 0 0 0>;
159 ralink,mtd-eeprom = <&boardconfig 0x410>;
160 ralink,mtd-eeprom-swap;
161 mtd-mac-address = <&boardconfig 0x16>;
162 mtd-mac-address-increment = <1>;