5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
9 model = "Astoria Networks ARV7510PW22";
12 bootargs = "console=ttyLTQ0,115200";
17 led-failsafe = &power;
27 device_type = "memory";
28 reg = <0x0 0x4000000>;
32 compatible = "gpio-keys-polled";
35 poll-interval = <100>;
39 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_RFKILL>;
44 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_POWER>;
49 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_RESTART>;
55 compatible = "gpio-leds";
58 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
59 default-state = "keep";
63 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
67 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
71 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
75 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
81 pinctrl-names = "default";
82 pinctrl-0 = <&state_default>;
84 state_default: pinmux {
86 lantiq,groups = "exin1";
87 lantiq,function = "exin";
92 lantiq,groups = "req1", "req2";
93 lantiq,function = "pci";
94 lantiq,open-drain = <1>;
99 lantiq,groups = "gnt1";
100 lantiq,function = "pci";
104 lantiq,pins = "io21";
109 lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
113 lantiq,pins = "io11", "io12", "io28";
114 lantiq,open-drain = <1>;
120 usb_vbus: regulator-usb-vbus {
121 compatible = "regulator-fixed";
123 regulator-name = "USB_VBUS";
125 regulator-min-microvolt = <5000000>;
126 regulator-max-microvolt = <5000000>;
128 gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
134 /* Switch reset 19 */
136 mtd-mac-address = <&boardconfig 0x16>;
141 compatible = "lantiq,nor";
143 reg = <0 0x0 0x1000000>;
144 #address-cells = <1>;
148 compatible = "fixed-partitions";
149 #address-cells = <1>;
154 reg = <0x00000 0x40000>;
160 reg = <0x40000 0x20000>;
166 reg = <0x60000 0xf80000>;
169 boardconfig: partition@fe0000 {
170 label = "board_config";
171 reg = <0xfe0000 0x20000>;
180 lantiq,external-clock;
182 0x7000 0 0 1 &icu0 30
183 0x7800 0 0 1 &icu0 135
184 0x7800 0 0 2 &icu0 135
185 0x7800 0 0 3 &icu0 135
187 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
191 compatible = "pci1814,3592";
192 reg = <0x7000 0 0 0 0>;
193 ralink,mtd-eeprom = <&boardconfig 0x410>;
194 ralink,mtd-eeprom-swap;
204 vbus-supply = <&usb_vbus>;
209 gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;