5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube";
9 model = "Astoria Networks ARV7519PW";
12 bootargs = "console=ttyLTQ0,115200";
17 led-failsafe = &power2;
22 led-internet = &online;
27 device_type = "memory";
28 reg = <0x0 0x4000000>;
32 compatible = "gpio-keys-polled";
35 poll-interval = <100>;
39 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_RFKILL>;
44 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_RESTART>;
50 compatible = "gpio-leds";
53 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
54 default-state = "keep";
58 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
62 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
66 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
70 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
74 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
78 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
82 gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
86 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
90 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
94 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
98 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
102 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
106 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
110 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
114 /* is there another way to "reserve" the GPIO? */
116 compatible = "gpio-export";
120 gpio-export,name = "switch";
121 gpio-export,output = <1>;
122 gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
128 pinctrl-names = "default";
129 pinctrl-0 = <&state_default>;
131 state_default: pinmux {
133 lantiq,groups = "ebu cs1";
134 lantiq,function = "ebu";
137 lantiq,groups = "req1";
138 lantiq,function = "pci";
139 lantiq,open-drain = <1>;
144 lantiq,groups = "gnt1";
145 lantiq,function = "pci";
150 lantiq,pins = "io21";
155 lantiq,pins = "io19";
164 mtd-mac-address = <&boardconfig 0x16>;
169 compatible = "lantiq,nor";
171 reg = <0 0x0 0x2000000>;
172 #address-cells = <1>;
176 compatible = "fixed-partitions";
177 #address-cells = <1>;
182 reg = <0x00000 0x40000>;
188 reg = <0x40000 0x20000>;
193 reg = <0x60000 0xf80000>;
196 boardconfig: partition@fe0000 {
197 label = "board_config";
198 reg = <0xfe0000 0x20000>;
207 lantiq,external-clock;
208 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
212 compatible = "pci0,0";
213 reg = <0x7000 0 0 0 0>;
214 ralink,mtd-eeprom = <&boardconfig 0x410>;
215 ralink,mtd-eeprom-swap;
223 /* warning: passive port only works with active devices */