5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
9 compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9";
10 model = "Orange Livebox 2.1";
13 bootargs = "console=ttyLTQ0,115200";
17 led-boot = &power_green;
18 led-failsafe = &power_green;
19 led-running = &power_green;
20 led-upgrade = &power_green;
22 led-dsl = &internet_green;
26 device_type = "memory";
27 reg = <0x0 0x8000000>;
31 compatible = "gpio-keys-polled";
34 poll-interval = <100>;
38 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_RESTART>;
43 gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RFKILL>;
48 gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_WPS_BUTTON>;
54 compatible = "gpio-leds";
57 label = "arv7519rw22:green:lan";
58 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
61 label = "arv7519rw22:red:internet";
62 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
64 power_green: power_green {
65 label = "arv7519rw22:green:power";
66 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
67 default-state = "keep";
70 label = "arv7519rw22:blue:alarm";
71 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
74 label = "arv7519rw22:orange:internet";
75 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
77 internet_green: internet_green {
78 label = "arv7519rw22:green:internet";
79 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
82 label = "arv7519rw22:green:voice";
83 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
87 usb_vbus: regulator-usb-vbus {
88 compatible = "regulator-fixed";
90 regulator-name = "USB_VBUS";
92 regulator-min-microvolt = <5000000>;
93 regulator-max-microvolt = <5000000>;
95 gpio = <&gpio 32 GPIO_ACTIVE_HIGH>;
102 compatible = "lantiq,xrx200-pdi";
103 #address-cells = <1>;
106 mtd-mac-address = <&boardconfig 0x16>;
110 compatible = "lantiq,xrx200-pdi-port";
113 phy-handle = <&phy0>;
116 compatible = "lantiq,xrx200-pdi-port";
119 phy-handle = <&phy13>;
122 compatible = "lantiq,xrx200-pdi-port";
125 phy-handle = <&phy14>;
128 compatible = "lantiq,xrx200-pdi-port";
131 phy-handle = <&phy11>;
134 compatible = "lantiq,xrx200-pdi-port";
137 phy-handle = <&phy12>;
142 #address-cells = <1>;
144 compatible = "lantiq,xrx200-mdio";
147 phy0: ethernet-phy@0 {
149 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
151 phy11: ethernet-phy@11 {
153 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
155 phy12: ethernet-phy@12 {
157 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
159 phy13: ethernet-phy@13 {
161 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
163 phy14: ethernet-phy@14 {
165 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
171 lantiq,gphy-mode = <GPHY_MODE_FE>;
175 lantiq,gphy-mode = <GPHY_MODE_FE>;
179 pinctrl-names = "default";
180 pinctrl-0 = <&state_default>;
182 state_default: pinmux {
184 lantiq,groups = "mdio";
185 lantiq,function = "mdio";
188 lantiq,pins = "io21";
197 compatible = "lantiq,nor";
199 reg = <0 0x0 0x2000000>;
200 #address-cells = <1>;
204 compatible = "fixed-partitions";
205 #address-cells = <1>;
216 reg = <0x60000 0x20000>;
222 reg = <0x80000 0x1f00000>;
225 boardconfig: partition@1f80000 {
226 label = "boardconfig";
227 reg = <0x1f80000 0x80000>;
236 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
249 vbus-supply = <&usb_vbus>;
254 vbus-supply = <&usb_vbus>;