5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_red;
17 led-failsafe = &power_blue;
18 led-running = &power_red;
19 led-upgrade = &power_red;
21 led-dsl = &internet_red;
27 device_type = "memory";
28 reg = <0x0 0x4000000>;
32 compatible = "gpio-keys-polled";
35 poll-interval = <100>;
39 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_WPS_BUTTON>;
44 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_POWER>;
49 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
54 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_RESTART>;
60 compatible = "gpio-leds";
62 label = "arv752dpw:blue:power";
63 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
65 internet_red: internet {
66 label = "arv752dpw:red:internet";
67 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
70 label = "arv752dpw:red:message";
71 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
74 label = "arv752dpw:red:power";
75 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
76 default-state = "keep";
79 label = "arv752dpw:red:voice";
80 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
83 label = "arv752dpw:red:umts";
84 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
87 label = "arv752dpw:red:wifi";
88 gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
91 label = "arv752dpw:green:tae-n";
92 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
95 label = "arv752dpw:green:tae-u";
96 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
99 label = "arv752dpw:green:isdn";
100 gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
103 label = "arv752dpw:blue:internet";
104 gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
107 label = "arv752dpw:blue:voice";
108 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
114 pinctrl-names = "default";
115 pinctrl-0 = <&state_default>;
117 state_default: pinmux {
119 lantiq,groups = "ebu cs1";
120 lantiq,function = "ebu";
123 lantiq,groups = "exin1";
124 lantiq,function = "exin";
129 lantiq,groups = "req2", "req1";
130 lantiq,function = "pci";
131 lantiq,open-drain = <1>;
136 lantiq,groups = "gnt1";
137 lantiq,function = "pci";
141 lantiq,pins = "io21";
146 lantiq,pins = "io3", "io5", "io6", "io8";
151 lantiq,pins = "io11", "io12", "io13", "io28";
154 lantiq,open-drain = <1>;
158 usb_vbus: regulator-usb-vbus {
159 compatible = "regulator-fixed";
161 regulator-name = "USB_VBUS";
163 regulator-min-microvolt = <5000000>;
164 regulator-max-microvolt = <5000000>;
166 gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
173 lantiq,shadow = <0x3>;
178 mtd-mac-address = <&boardconfig 0x16>;
183 compatible = "lantiq,nor";
185 reg = <0 0x0 0x800000>;
186 #address-cells = <1>;
190 compatible = "fixed-partitions";
191 #address-cells = <1>;
196 reg = <0x00000 0x10000>;
202 reg = <0x10000 0x10000>;
208 reg = <0x20000 0x7d0000>;
211 boardconfig: partition@7f0000 {
212 label = "board_config";
213 reg = <0x7f0000 0x10000>;
222 lantiq,external-clock;
223 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
224 interrupt-map = <0x7000 0 0 1 &icu0 135>;
228 compatible = "pci1814,0601";
229 reg = <0x7000 0 0 0 0>;
230 ralink,mtd-eeprom = <&boardconfig 0x410>;
231 ralink,mtd-eeprom-swap;
241 vbus-supply = <&usb_vbus>;
246 gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;