5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_red;
17 led-failsafe = &power_blue;
18 led-running = &power_red;
19 led-upgrade = &power_red;
21 led-dsl = &internet_red;
27 device_type = "memory";
28 reg = <0x0 0x4000000>;
32 compatible = "gpio-keys-polled";
35 poll-interval = <100>;
39 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_WPS_BUTTON>;
44 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_POWER>;
49 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
54 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_RESTART>;
60 compatible = "gpio-leds";
62 label = "arv752dpw22:blue:power";
63 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
65 internet_red: internet {
66 label = "arv752dpw22:red:internet";
67 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
70 label = "arv752dpw22:red:message";
71 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
74 label = "arv752dpw22:red:power";
75 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
76 default-state = "keep";
79 label = "arv752dpw22:red:voice";
80 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
83 label = "arv752dpw22:red:umts";
84 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
87 label = "arv752dpw22:red:wifi";
88 gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
91 label = "arv752dpw22:green:tae-n";
92 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
95 label = "arv752dpw22:green:tae-u";
96 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
99 label = "arv752dpw22:green:isdn";
100 gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
103 label = "arv752dpw22:blue:internet";
104 gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
107 label = "arv752dpw22:blue:voice";
108 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
111 label = "arv752dpw22:green:lan1";
112 gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>;
115 label = "arv752dpw22:green:lan2";
116 gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>;
119 label = "arv752dpw22:green:lan3";
120 gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>;
123 label = "arv752dpw22:green:lan4";
124 gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>;
128 usb_vbus: regulator-usb-vbus {
129 compatible = "regulator-fixed";
131 regulator-name = "USB_VBUS";
133 regulator-min-microvolt = <5000000>;
134 regulator-max-microvolt = <5000000>;
136 gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
142 pinctrl-names = "default";
143 pinctrl-0 = <&state_default>;
145 state_default: pinmux {
147 lantiq,groups = "ebu cs1";
148 lantiq,function = "ebu";
151 lantiq,groups = "exin1";
152 lantiq,function = "exin";
157 lantiq,groups = "req1";
158 lantiq,function = "pci";
163 lantiq,groups = "gnt1";
164 lantiq,function = "pci";
165 lantiq,open-drain = <1>;
169 lantiq,pins = "io21";
170 lantiq,open-drain = <1>;
174 lantiq,pins = "io3", "io5", "io6", "io8";
175 lantiq,open-drain = <1>;
179 lantiq,pins = "io11", "io12", "io13", "io28";
194 mtd-mac-address = <&boardconfig 0x16>;
199 compatible = "lantiq,nor";
201 reg = <0 0x0 0x800000>;
202 #address-cells = <1>;
206 compatible = "fixed-partitions";
207 #address-cells = <1>;
212 reg = <0x00000 0x30000>;
218 reg = <0x30000 0x10000>;
224 reg = <0x40000 0x7b0000>;
227 boardconfig: partition@7f0000 {
228 label = "board_config";
229 reg = <0x7f0000 0x10000>;
238 lantiq,external-clock;
240 0x7000 0 0 1 &icu0 30
241 0x7800 0 0 1 &icu0 135
242 0x7800 0 0 2 &icu0 135
243 0x7800 0 0 3 &icu0 135
245 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
249 compatible = "pci1814,3592";
250 reg = <0x7000 0 0 0 0>;
251 ralink,mtd-eeprom = <&boardconfig 0x410>;
252 ralink,mtd-eeprom-swap;
253 mtd-mac-address = <&boardconfig 0x16>;
263 vbus-supply = <&usb_vbus>;
268 gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;