target/linux/lantiq/files/arch/mips/boot/dts/VG3503J.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   7
   8 / {
   9         compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
  10         model = "BT OpenReach VDSL Modem";
  11
  12         chosen {
  13                 bootargs = "console=ttyLTQ0,115200";
  14         };
  15
  16         aliases {
  17                 led-boot = &power_green;
  18                 led-failsafe = &power_red;
  19                 led-running = &power_green;
  20                 led-upgrade = &power_green;
  21
  22                 led-dsl = &dsl;
  23         };
  24
  25         memory@0 {
  26                 device_type = "memory";
  27                 reg = <0x0 0x2000000>;
  28         };
  29
  30         keys {
  31                 compatible = "gpio-keys-polled";
  32                 poll-interval = <100>;
  33                 reset {
  34                         label = "reset";
  35                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_RESTART>;
  37                 };
  38         };
  39
  40         leds {
  41                 compatible = "gpio-leds";
  42
  43                 power_red: power2 {
  44                         label = "vg3503j:red:power";
  45                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  46                 };
  47                 dsl: dsl {
  48                         label = "vg3503j:green:dsl";
  49                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  50                 };
  51                 power_green: power {
  52                         label = "vg3503j:green:power";
  53                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
  54                         default-state = "keep";
  55                 };
  56         };
  57 };
  58
  59 &eth0 {
  60         interface@0 {
  61                 compatible = "lantiq,xrx200-pdi";
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64                 reg = <0>;
  65
  66                 lantiq,switch;
  67                 ethernet@2 {
  68                         compatible = "lantiq,xrx200-pdi-port";
  69                         reg = <2>;
  70                         phy-mode = "mii";
  71                         phy-handle = <&phy11>;
  72                 };
  73                 ethernet@4 {
  74                         compatible = "lantiq,xrx200-pdi-port";
  75                         reg = <4>;
  76                         phy-mode = "mii";
  77                         phy-handle = <&phy13>;
  78                 };
  79         };
  80
  81         mdio {
  82                 #address-cells = <1>;
  83                 #size-cells = <0>;
  84                 compatible = "lantiq,xrx200-mdio";
  85
  86                 phy11: ethernet-phy@11 {
  87                         reg = <0x11>;
  88                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
  89                         lantiq,led1h = <0x70>;
  90                         lantiq,led1l = <0x00>;
  91                         lantiq,led2h = <0x00>;
  92                         lantiq,led2l = <0x03>;
  93                 };
  94                 phy13: ethernet-phy@13 {
  95                         reg = <0x13>;
  96                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
  97                         lantiq,led1h = <0x70>;
  98                         lantiq,led1l = <0x00>;
  99                         lantiq,led2h = <0x00>;
 100                         lantiq,led2l = <0x03>;
 101                 };
 102         };
 103 };
 104
 105 &gphy0 {
 106         lantiq,gphy-mode = <GPHY_MODE_GE>;
 107 };
 108
 109 &gphy1 {
 110         lantiq,gphy-mode = <GPHY_MODE_GE>;
 111 };
 112
 113 &gpio {
 114         pinctrl-names = "default";
 115         pinctrl-0 = <&state_default>;
 116
 117         state_default: pinmux {
 118                 gphy-leds {
 119                         lantiq,groups = "gphy0 led0", "gphy0 led1",
 120                                         "gphy0 led2", "gphy1 led0",
 121                                         "gphy1 led1", "gphy1 led2";
 122                         lantiq,function = "gphy";
 123                         lantiq,pull = <2>;
 124                         lantiq,open-drain = <0>;
 125                         lantiq,output = <1>;
 126                 };
 127         };
 128 };
 129
 130 &localbus {
 131         flash@0 {
 132                 compatible = "lantiq,nor";
 133                 bank-width = <2>;
 134                 reg = <0 0x0 0x2000000>;
 135
 136                 partitions {
 137                         compatible = "fixed-partitions";
 138                         #address-cells = <1>;
 139                         #size-cells = <1>;
 140
 141                         partition@0 {
 142                                 label = "uboot";
 143                                 reg = <0x00000 0x20000>;
 144                         };
 145
 146                         partition@20000 {
 147                                 label = "firmware";
 148                                 reg = <0x20000 0x7d0000>;
 149                         };
 150
 151                         partition@7f0000 {
 152                                 label = "uboot-env";
 153                                 reg = <0x7f0000 0x10000>;
 154                         };
 155                 };
 156         };
 157 };