3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
8 device_type = "memory";
12 usb_vbus: regulator-usb-vbus {
13 compatible = "regulator-fixed";
15 regulator-name = "USB_VBUS";
17 regulator-min-microvolt = <5000000>;
18 regulator-max-microvolt = <5000000>;
20 gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
27 compatible = "lantiq,xrx200-pdi";
31 mtd-mac-address = <&romfile 0xf100>;
35 compatible = "lantiq,xrx200-pdi-port";
39 // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
42 compatible = "lantiq,xrx200-pdi-port";
48 compatible = "lantiq,xrx200-pdi-port";
51 phy-handle = <&phy11>;
54 compatible = "lantiq,xrx200-pdi-port";
57 phy-handle = <&phy13>;
64 compatible = "lantiq,xrx200-mdio";
66 phy0: ethernet-phy@0 {
68 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
70 phy5: ethernet-phy@5 {
72 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
74 phy11: ethernet-phy@11 {
76 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
78 phy13: ethernet-phy@13 {
80 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
86 lantiq,gphy-mode = <GPHY_MODE_GE>;
90 lantiq,gphy-mode = <GPHY_MODE_GE>;
94 pinctrl-names = "default";
95 pinctrl-0 = <&state_default>;
97 state_default: pinmux {
99 lantiq,groups = "mdio";
100 lantiq,function = "mdio";
103 lantiq,groups = "gphy0 led1", "gphy1 led1";
104 lantiq,function = "gphy";
106 lantiq,open-drain = <0>;
110 lantiq,pins = "io42";
112 lantiq,open-drain = <0>;
116 lantiq,pins = "io38";
121 pins_spi_default: pins_spi_default {
123 lantiq,groups = "spi_di";
124 lantiq,function = "spi";
127 lantiq,groups = "spi_do", "spi_clk",
129 lantiq,function = "spi";
137 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
143 pinctrl-names = "default";
144 pinctrl-0 = <&pins_spi_default>;
147 #address-cells = <1>;
149 compatible = "jedec,spi-nor";
151 spi-max-frequency = <33250000>;
155 compatible = "fixed-partitions";
156 #address-cells = <1>;
166 reg = <0x20000 0xf90000>;
171 reg = <0xfb0000 0x10000>;
177 reg = <0xfc0000 0x10000>;
182 romfile: partition@fd0000 {
183 reg = <0xfd0000 0x10000>;
189 reg = <0xfe0000 0x10000>;
195 reg = <0xff0000 0x10000>;
213 vbus-supply = <&usb_vbus>;
218 vbus-supply = <&usb_vbus>;