3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
8 device_type = "memory";
12 usb_vbus: regulator-usb-vbus {
13 compatible = "regulator-fixed";
15 regulator-name = "USB_VBUS";
17 regulator-min-microvolt = <5000000>;
18 regulator-max-microvolt = <5000000>;
20 gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
27 compatible = "lantiq,xrx200-pdi";
31 mtd-mac-address = <&romfile 0xf100>;
35 compatible = "lantiq,xrx200-pdi-port";
39 // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
42 compatible = "lantiq,xrx200-pdi-port";
48 compatible = "lantiq,xrx200-pdi-port";
51 phy-handle = <&phy11>;
54 compatible = "lantiq,xrx200-pdi-port";
57 phy-handle = <&phy13>;
64 compatible = "lantiq,xrx200-mdio";
67 phy0: ethernet-phy@0 {
69 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
71 phy5: ethernet-phy@5 {
73 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
75 phy11: ethernet-phy@11 {
77 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
79 phy13: ethernet-phy@13 {
81 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
87 lantiq,gphy-mode = <GPHY_MODE_GE>;
91 lantiq,gphy-mode = <GPHY_MODE_GE>;
95 pinctrl-names = "default";
96 pinctrl-0 = <&state_default>;
98 state_default: pinmux {
100 lantiq,groups = "mdio";
101 lantiq,function = "mdio";
104 lantiq,groups = "gphy0 led1", "gphy1 led1";
105 lantiq,function = "gphy";
107 lantiq,open-drain = <0>;
111 lantiq,pins = "io42";
113 lantiq,open-drain = <0>;
117 lantiq,pins = "io38";
122 pins_spi_default: pins_spi_default {
124 lantiq,groups = "spi_di";
125 lantiq,function = "spi";
128 lantiq,groups = "spi_do", "spi_clk",
130 lantiq,function = "spi";
138 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
144 pinctrl-names = "default";
145 pinctrl-0 = <&pins_spi_default>;
148 #address-cells = <1>;
150 compatible = "jedec,spi-nor";
152 spi-max-frequency = <33250000>;
156 compatible = "fixed-partitions";
157 #address-cells = <1>;
167 reg = <0x20000 0xf90000>;
172 reg = <0xfb0000 0x10000>;
178 reg = <0xfc0000 0x10000>;
183 romfile: partition@fd0000 {
184 reg = <0xfd0000 0x10000>;
190 reg = <0xfe0000 0x10000>;
196 reg = <0xff0000 0x10000>;
214 vbus-supply = <&usb_vbus>;
219 vbus-supply = <&usb_vbus>;