1 #include <dt-bindings/gpio/gpio.h>
6 compatible = "lantiq,xway", "lantiq,danube";
13 stdout-path = "serial0:115200n8";
21 compatible = "mips,mips24Kc";
27 compatible = "syscon-reboot";
37 compatible = "lantiq,biu", "simple-bus";
38 reg = <0x1f800000 0x800000>;
39 ranges = <0x0 0x1f800000 0x7fffff>;
42 #interrupt-cells = <1>;
44 compatible = "lantiq,icu";
53 compatible = "lantiq,wdt";
61 compatible = "lantiq,sram", "simple-bus";
62 reg = <0x1f000000 0x800000>;
63 ranges = <0x0 0x1f000000 0x7fffff>;
66 #interrupt-cells = <1>;
68 compatible = "lantiq,eiu-xway";
69 reg = <0x101000 0x1000>;
70 interrupt-parent = <&icu0>;
71 lantiq,eiu-irqs = <166 135 66>;
75 compatible = "lantiq,pmu-xway";
76 reg = <0x102000 0x1000>;
80 compatible = "lantiq,cgu-xway";
81 reg = <0x103000 0x1000>;
87 compatible = "lantiq,vmmc-xway";
88 reg = <0x103000 0x400>;
89 interrupt-parent = <&icu0>;
90 interrupts = <150 151 152 153 154 155>;
96 compatible = "lantiq,danube-rcu", "simple-mfd", "syscon";
97 reg = <0x203000 0x1000>;
98 ranges = <0x0 0x203000 0x100>;
101 reset: reset-controller@10 {
102 compatible = "lantiq,danube-reset";
103 reg = <0x10 4>, <0x14 4>;
108 usb_phy: usb2-phy@18 {
109 compatible = "lantiq,danube-usb2-phy";
113 resets = <&reset 4 4>;
114 reset-names = "ctrl";
121 #address-cells = <1>;
123 compatible = "lantiq,fpi", "simple-bus";
124 ranges = <0x0 0x10000000 0xeefffff>;
125 reg = <0x10000000 0xef00000>;
127 localbus: localbus@0 {
128 #address-cells = <2>;
130 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
131 1 0 0x4000000 0x4000010>; /* addsel1 */
132 compatible = "lantiq,localbus", "simple-bus";
135 compatible = "lantiq,gpio-mm";
137 #address-cells = <1>;
146 compatible = "lantiq,gptu-xway";
147 reg = <0xe100a00 0x100>;
148 interrupt-parent = <&icu0>;
149 interrupts = <126 127 128 129 130 131>;
154 compatible = "lantiq,gpio-stp-xway";
156 reg = <0xe100bb0 0x40>;
157 lantiq,shadow = <0xfff>;
158 lantiq,groups = <0x3>;
162 asc0: serial@e100400 {
163 compatible = "lantiq,asc";
164 reg = <0xe100400 0x400>;
165 interrupt-parent = <&icu0>;
166 interrupts = <104 105 106>;
170 gpio: pinmux@e100b10 {
171 compatible = "lantiq,danube-pinctrl";
174 reg = <0xe100b10 0xa0>;
177 asc1: serial@e100c00 {
178 compatible = "lantiq,asc";
179 reg = <0xe100c00 0x400>;
180 interrupt-parent = <&icu0>;
181 interrupts = <112 113 114>;
185 compatible = "lantiq,danube-usb";
186 reg = <0xe101000 0x1000
188 interrupt-parent = <&icu0>;
192 phy-names = "usb2-phy";
197 compatible = "lantiq,deu-danube";
198 reg = <0xe103100 0xf00>;
202 compatible = "lantiq,dma-xway";
203 reg = <0xe104100 0x800>;
207 compatible = "lantiq,ebu-xway";
208 reg = <0xe105300 0x100>;
212 compatible = "lantiq,mei-xway";
213 reg = <0xe116000 0x400>;
214 interrupt-parent = <&icu0>;
219 compatible = "lantiq,etop-xway";
220 reg = <0xe180000 0x40000>;
221 interrupt-parent = <&icu0>;
222 interrupts = <73 78>;
223 mac-address = [ 00 11 22 33 44 55 ];
227 compatible = "lantiq,ppe-danube";
228 reg = <0xe234000 0x40000>;
229 interrupt-parent = <&icu0>;
236 #address-cells = <3>;
238 #interrupt-cells = <1>;
239 compatible = "lantiq,pci-xway";
240 bus-range = <0x0 0x0>;
241 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
242 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
243 reg = <0x7000000 0x8000 /* config space */
244 0xe105400 0x400>; /* pci bridge */
245 lantiq,bus-clock = <33333333>;
246 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
247 interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
248 req-mask = <0x1>; /* GNT1 */
253 compatible = "lantiq,adsl-danube";