3 #include <dt-bindings/input/input.h>
6 compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube";
10 bootargs = "console=ttyLTQ0,115200";
14 led-boot = &power_red;
15 led-failsafe = &power_blue;
16 led-running = &power_red;
17 led-upgrade = &power_red;
19 led-dsl = &internet_red;
24 device_type = "memory";
25 reg = <0x0 0x4000000>;
29 compatible = "gpio-keys-polled";
30 poll-interval = <100>;
34 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
35 linux,code = <KEY_WPS_BUTTON>;
39 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_POWER>;
44 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
49 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_RESTART>;
55 compatible = "gpio-leds";
58 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
60 internet_red: internet {
61 label = "red:internet";
62 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
65 label = "red:message";
66 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
70 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
71 default-state = "keep";
75 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
79 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
80 trigger-sources = <&ehci_port1>,
81 <&ehci_port2>, <&uhci_port2>;
82 linux,default-trigger = "usbport";
86 gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
89 label = "green:tae-n";
90 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
93 label = "green:tae-u";
94 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
98 gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
101 label = "blue:internet";
102 gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
105 label = "blue:voice";
106 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
109 label = "green:lan1";
110 gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>;
113 label = "green:lan2";
114 gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>;
117 label = "green:lan3";
118 gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>;
121 label = "green:lan4";
122 gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>;
126 usb_vbus: regulator-usb-vbus {
127 compatible = "regulator-fixed";
129 regulator-name = "USB_VBUS";
131 regulator-min-microvolt = <5000000>;
132 regulator-max-microvolt = <5000000>;
134 gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
140 pinctrl-names = "default";
141 pinctrl-0 = <&state_default>;
143 state_default: pinmux {
145 lantiq,groups = "ebu cs1";
146 lantiq,function = "ebu";
149 lantiq,groups = "exin1";
150 lantiq,function = "exin";
155 lantiq,pins = "io21";
156 lantiq,open-drain = <1>;
160 lantiq,pins = "io3", "io5", "io6", "io8";
161 lantiq,open-drain = <1>;
165 lantiq,pins = "io11", "io12", "io13", "io28";
174 mtd-mac-address = <&boardconfig 0x16>;
179 compatible = "lantiq,nor";
181 reg = <0 0x0 0x800000>;
184 compatible = "fixed-partitions";
185 #address-cells = <1>;
190 reg = <0x00000 0x30000>;
195 label = "u-boot-env";
196 reg = <0x30000 0x10000>;
202 reg = <0x40000 0x7b0000>;
205 boardconfig: partition@7f0000 {
206 label = "board_config";
207 reg = <0x7f0000 0x10000>;
214 compatible = "lantiq,gpio-mm";
216 #address-cells = <1>;
227 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
228 pinctrl-names = "default";
230 lantiq,external-clock;
232 0x7000 0 0 1 &icu0 30
233 0x7800 0 0 1 &icu0 135
234 0x7800 0 0 2 &icu0 135
235 0x7800 0 0 3 &icu0 135
237 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
241 compatible = "pci1814,3592";
242 reg = <0x7000 0 0 0 0>;
243 ralink,mtd-eeprom = <&boardconfig 0x410>;
244 ralink,mtd-eeprom-swap;
245 mtd-mac-address = <&boardconfig 0x16>;
249 #address-cells = <1>;
251 compatible = "pci1106,3038";
252 reg = <0x7800 0 0 0 0>; /* 0000:00:0f.0: UHCI Host Controller */
256 #trigger-source-cells = <0>;
261 #address-cells = <1>;
263 compatible = "pci1106,3038";
264 reg = <0x7a00 0 0 0 0>; /* 0000:00:0f.2: EHCI Host Controller*/
268 #trigger-source-cells = <0>;
279 vbus-supply = <&usb_vbus>;
284 gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;