3 #include <dt-bindings/input/input.h>
7 bootargs = "console=ttyLTQ0,115200";
12 led-failsafe = &power;
16 led-internet = &online;
22 reg = <0x0 0x4000000>;
28 gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
35 compatible = "lantiq,nor";
37 reg = <0 0x0 0x2000000>;
42 compatible = "fixed-partitions";
48 reg = <0x00000 0x10000>; /* 64 KB */
54 reg = <0x10000 0x10000>; /* 64 KB */
60 reg = <0x20000 0x3d0000>;
63 boardconfig: partition@400000 {
64 label = "boardconfig";
65 reg = <0x3f0000 0x10000>;
71 gpiomm: gpiomm@4000000 {
72 compatible = "lantiq,gpio-mm";
78 lantiq,shadow = <0x0>;
82 compatible = "ath5k,eeprom";
83 ath,eep-flash = <&boardconfig 0x400>;
84 ath,mac-offset = <0x16>;
85 ath,mac-increment = <1>;
90 gpio: pinmux@E100B10 {
91 pinctrl-names = "default";
92 pinctrl-0 = <&state_default>;
94 state_default: pinmux {
96 lantiq,groups = "ebu cs1";
97 lantiq,function = "ebu";
100 lantiq,groups = "req1", "req2";
101 lantiq,function = "pci";
102 lantiq,open-drain = <1>;
107 lantiq,groups = "gnt1", "gnt2";
108 lantiq,function = "pci";
117 mtd-mac-address = <&boardconfig 0x16>;
122 gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
127 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
133 compatible = "gpio-keys-polled";
134 #address-cells = <1>;
136 poll-interval = <100>;
140 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
141 linux,code = <KEY_RFKILL>;
145 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
146 linux,code = <KEY_RESTART>;
151 compatible = "gpio-leds";
154 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
155 default-state = "keep";
159 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
163 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
167 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
171 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
175 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
179 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
183 gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
187 gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
191 gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
195 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;