3 #include <dt-bindings/input/input.h>
7 bootargs = "console=ttyLTQ0,115200";
12 led-failsafe = &power;
17 led-internet = &online;
23 reg = <0x0 0x4000000>;
27 compatible = "ath5k,eeprom";
28 ath,eep-flash = <&boardconfig 0x400>;
29 ath,mac-offset = <0x16>;
30 ath,mac-increment = <1>;
35 compatible = "gpio-keys-polled";
38 poll-interval = <100>;
42 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_RFKILL>;
47 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
48 linux,code = <KEY_RESTART>;
53 compatible = "gpio-leds";
56 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
57 default-state = "keep";
61 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
65 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
69 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
73 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
77 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
81 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
85 gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
89 gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
93 gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
97 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
101 usb_vbus: regulator-usb-vbus {
102 compatible = "regulator-fixed";
104 regulator-name = "USB_VBUS";
106 regulator-min-microvolt = <5000000>;
107 regulator-max-microvolt = <5000000>;
109 gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
115 pinctrl-names = "default";
116 pinctrl-0 = <&state_default>;
118 state_default: pinmux {
120 lantiq,groups = "ebu cs1";
121 lantiq,function = "ebu";
124 lantiq,groups = "req1", "req2";
125 lantiq,function = "pci";
126 lantiq,open-drain = <1>;
131 lantiq,groups = "gnt1", "gnt2";
132 lantiq,function = "pci";
141 lantiq,shadow = <0x0>;
146 mtd-mac-address = <&boardconfig 0x16>;
151 compatible = "lantiq,nor";
153 reg = <0 0x0 0x2000000>;
154 #address-cells = <1>;
158 compatible = "fixed-partitions";
159 #address-cells = <1>;
164 reg = <0x00000 0x10000>; /* 64 KB */
170 reg = <0x10000 0x10000>; /* 64 KB */
176 reg = <0x20000 0x3d0000>;
179 boardconfig: partition@400000 {
180 label = "boardconfig";
181 reg = <0x3f0000 0x10000>;
190 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
200 vbus-supply = <&usb_vbus>;
205 gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;