5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
9 model = "Astoria Networks ARV7510PW22";
12 bootargs = "console=ttyLTQ0,115200";
17 led-failsafe = &power;
26 reg = <0x0 0x4000000>;
30 compatible = "gpio-keys-polled";
33 poll-interval = <100>;
37 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_RFKILL>;
42 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_POWER>;
47 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
48 linux,code = <KEY_RESTART>;
53 compatible = "gpio-leds";
56 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
57 default-state = "keep";
61 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
65 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
69 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
73 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
79 pinctrl-names = "default";
80 pinctrl-0 = <&state_default>;
82 state_default: pinmux {
84 lantiq,groups = "exin1";
85 lantiq,function = "exin";
90 lantiq,groups = "req1", "req2";
91 lantiq,function = "pci";
92 lantiq,open-drain = <1>;
97 lantiq,groups = "gnt1";
98 lantiq,function = "pci";
102 lantiq,pins = "io21";
107 lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
111 lantiq,pins = "io11", "io12", "io28";
112 lantiq,open-drain = <1>;
120 /* Switch reset 19 */
122 mtd-mac-address = <&boardconfig 0x16>;
127 compatible = "lantiq,nor";
129 reg = <0 0x0 0x1000000>;
130 #address-cells = <1>;
134 compatible = "fixed-partitions";
135 #address-cells = <1>;
140 reg = <0x00000 0x40000>;
146 reg = <0x40000 0x20000>;
152 reg = <0x60000 0xf80000>;
155 boardconfig: partition@fe0000 {
156 label = "board_config";
157 reg = <0xfe0000 0x20000>;
166 lantiq,external-clock;
168 0x7000 0 0 1 &icu0 30
169 0x7800 0 0 1 &icu0 135
170 0x7800 0 0 2 &icu0 135
171 0x7800 0 0 3 &icu0 135
173 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
177 compatible = "pci1814,3592";
178 reg = <0x7000 0 0 0 0>;
179 ralink,mtd-eeprom = <&boardconfig 0x410>;
180 ralink,mtd-eeprom-swap;
186 gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
191 gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;