5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_red;
17 led-failsafe = &power_blue;
18 led-running = &power_red;
19 led-upgrade = &power_red;
21 led-dsl = &internet_red;
27 reg = <0x0 0x4000000>;
31 compatible = "gpio-keys-polled";
34 poll-interval = <100>;
38 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_WPS_BUTTON>;
43 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_POWER>;
48 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
53 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
54 linux,code = <KEY_RESTART>;
59 compatible = "gpio-leds";
61 label = "arv752dpw22:blue:power";
62 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
64 internet_red: internet {
65 label = "arv752dpw22:red:internet";
66 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
69 label = "arv752dpw22:red:message";
70 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
73 label = "arv752dpw22:red:power";
74 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
75 default-state = "keep";
78 label = "arv752dpw22:red:voice";
79 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
82 label = "arv752dpw22:red:umts";
83 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
86 label = "arv752dpw22:red:wifi";
87 gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
90 label = "arv752dpw22:green:tae-n";
91 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
94 label = "arv752dpw22:green:tae-u";
95 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
98 label = "arv752dpw22:green:isdn";
99 gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
102 label = "arv752dpw22:blue:internet";
103 gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
106 label = "arv752dpw22:blue:voice";
107 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
110 label = "arv752dpw22:green:lan1";
111 gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>;
114 label = "arv752dpw22:green:lan2";
115 gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>;
118 label = "arv752dpw22:green:lan3";
119 gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>;
122 label = "arv752dpw22:green:lan4";
123 gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>;
127 usb_vbus: regulator-usb-vbus {
128 compatible = "regulator-fixed";
130 regulator-name = "USB_VBUS";
132 regulator-min-microvolt = <5000000>;
133 regulator-max-microvolt = <5000000>;
135 gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&state_default>;
144 state_default: pinmux {
146 lantiq,groups = "ebu cs1";
147 lantiq,function = "ebu";
150 lantiq,groups = "exin1";
151 lantiq,function = "exin";
156 lantiq,groups = "req1";
157 lantiq,function = "pci";
162 lantiq,groups = "gnt1";
163 lantiq,function = "pci";
164 lantiq,open-drain = <1>;
168 lantiq,pins = "io21";
169 lantiq,open-drain = <1>;
173 lantiq,pins = "io3", "io5", "io6", "io8";
174 lantiq,open-drain = <1>;
178 lantiq,pins = "io11", "io12", "io13", "io28";
193 mtd-mac-address = <&boardconfig 0x16>;
198 compatible = "lantiq,nor";
200 reg = <0 0x0 0x800000>;
201 #address-cells = <1>;
205 compatible = "fixed-partitions";
206 #address-cells = <1>;
211 reg = <0x00000 0x30000>;
217 reg = <0x30000 0x10000>;
223 reg = <0x40000 0x7b0000>;
226 boardconfig: partition@7f0000 {
227 label = "board_config";
228 reg = <0x7f0000 0x10000>;
237 lantiq,external-clock;
239 0x7000 0 0 1 &icu0 30
240 0x7800 0 0 1 &icu0 135
241 0x7800 0 0 2 &icu0 135
242 0x7800 0 0 3 &icu0 135
244 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
248 compatible = "pci1814,3592";
249 reg = <0x7000 0 0 0 0>;
250 ralink,mtd-eeprom = <&boardconfig 0x410>;
251 ralink,mtd-eeprom-swap;
252 mtd-mac-address = <&boardconfig 0x16>;
262 vbus-supply = <&usb_vbus>;
267 gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;