5 #include <dt-bindings/input/input.h>
8 compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
9 model = "BT OpenReach VDSL Modem";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_green;
17 led-failsafe = &power_red;
18 led-running = &power_green;
24 reg = <0x0 0x2000000>;
28 compatible = "lantiq,phy-xrx200";
29 firmware1 = "lantiq/xrx200_phy22f_a14.bin"; /*VR9 1.1*/
30 firmware2 = "lantiq/xrx200_phy22f_a22.bin"; /*VR9 1.2*/
35 compatible = "gpio-keys-polled";
38 poll-interval = <100>;
42 gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_RESTART>;
48 compatible = "gpio-leds";
51 label = "asl56026:green:dsl";
52 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
55 /* power-* is a bicolour led */
56 power_green: power_green {
57 label = "asl56026:green:power";
58 gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
59 default-state = "keep";
62 power_red: power_red {
63 label = "asl56026:red:power";
64 gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
69 compatible = "gpio-export";
73 gpio-export,name = "power_led_blink";
74 gpio-export,output = <0>;
75 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
82 compatible = "lantiq,xrx200-pdi";
89 compatible = "lantiq,xrx200-pdi-port";
92 phy-handle = <&phy11>;
96 compatible = "lantiq,xrx200-pdi-port";
99 phy-handle = <&phy14>;
105 #address-cells = <1>;
107 compatible = "lantiq,xrx200-mdio";
110 phy11: ethernet-phy@11 {
112 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
115 phy14: ethernet-phy@14 {
117 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
124 pinctrl-names = "default";
125 pinctrl-0 = <&state_default>;
127 state_default: pinmux {
129 lantiq,groups = "mdio";
130 lantiq,function = "mdio";
137 compatible = "lantiq,nor";
139 reg = <0 0x0 0x0800000>;
140 #address-cells = <1>;
144 compatible = "fixed-partitions";
145 #address-cells = <1>;
155 reg = <0x30000 0x10000>;
160 reg = <0x40000 0x750000>;
165 reg = <0x790000 0x70000>;