5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
9 compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9";
10 model = "BT OpenReach VDSL Modem";
13 bootargs = "console=ttyLTQ0,115200";
17 led-boot = &power_green;
18 led-failsafe = &power_red;
19 led-running = &power_green;
25 reg = <0x0 0x2000000>;
29 compatible = "gpio-keys-polled";
32 poll-interval = <100>;
36 gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
37 linux,code = <KEY_RESTART>;
42 compatible = "gpio-leds";
45 label = "asl56026:green:dsl";
46 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
49 /* power-* is a bicolour led */
50 power_green: power_green {
51 label = "asl56026:green:power";
52 gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
53 default-state = "keep";
56 power_red: power_red {
57 label = "asl56026:red:power";
58 gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
63 compatible = "gpio-export";
67 gpio-export,name = "power_led_blink";
68 gpio-export,output = <0>;
69 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
76 compatible = "lantiq,xrx200-pdi";
83 compatible = "lantiq,xrx200-pdi-port";
86 phy-handle = <&phy11>;
90 compatible = "lantiq,xrx200-pdi-port";
93 phy-handle = <&phy14>;
101 compatible = "lantiq,xrx200-mdio";
104 phy11: ethernet-phy@11 {
106 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
109 phy14: ethernet-phy@14 {
111 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
118 lantiq,gphy-mode = <GPHY_MODE_FE>;
122 lantiq,gphy-mode = <GPHY_MODE_FE>;
126 pinctrl-names = "default";
127 pinctrl-0 = <&state_default>;
129 state_default: pinmux {
131 lantiq,groups = "mdio";
132 lantiq,function = "mdio";
139 compatible = "lantiq,nor";
141 reg = <0 0x0 0x0800000>;
142 #address-cells = <1>;
146 compatible = "fixed-partitions";
147 #address-cells = <1>;
157 reg = <0x30000 0x10000>;
162 reg = <0x40000 0x750000>;
167 reg = <0x790000 0x70000>;