5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
9 compatible = "avm,fritz7360sl", "lantiq,xway", "lantiq,vr9";
10 model = "1&1 HomeServer";
13 bootargs = "console=ttyLTQ0,115200";
17 led-boot = &power_green;
18 led-failsafe = &power_red;
19 led-running = &power_green;
20 led-upgrade = &power_green;
22 led-dsl = &info_green;
27 reg = <0x0 0x8000000>;
31 compatible = "gpio-keys-polled";
34 poll-interval = <100>;
37 gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
38 linux,code = <KEY_PHONE>;
42 gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
43 linux,code = <KEY_WLAN>;
48 compatible = "gpio-leds";
51 label = "fritz7360sl:green:power";
52 gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
53 default-state = "keep";
56 label = "fritz7360sl:red:power";
57 gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
60 label = "fritz7360sl:red:info";
61 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
63 info_green: info_green {
64 label = "fritz7360sl:green:info";
65 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
68 label = "fritz7360sl:green:wlan";
69 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
72 label = "fritz7360sl:green:dect";
73 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
80 compatible = "lantiq,xrx200-pdi";
84 mtd-mac-address = <&urlader 0xa91>;
85 mtd-mac-address-increment = <(-2)>;
89 compatible = "lantiq,xrx200-pdi-port";
95 compatible = "lantiq,xrx200-pdi-port";
101 compatible = "lantiq,xrx200-pdi-port";
104 phy-handle = <&phy11>;
107 compatible = "lantiq,xrx200-pdi-port";
110 phy-handle = <&phy13>;
115 #address-cells = <1>;
117 compatible = "lantiq,xrx200-mdio";
120 phy0: ethernet-phy@0 {
122 compatible = "ethernet-phy-ieee802.3-c22";
123 reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
125 phy1: ethernet-phy@1 {
127 compatible = "ethernet-phy-ieee802.3-c22";
128 reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
130 phy11: ethernet-phy@11 {
132 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
134 phy13: ethernet-phy@13 {
136 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
142 lantiq,gphy-mode = <GPHY_MODE_GE>;
146 lantiq,gphy-mode = <GPHY_MODE_GE>;
150 pinctrl-names = "default";
151 pinctrl-0 = <&state_default>;
153 state_default: pinmux {
155 lantiq,groups = "mdio";
156 lantiq,function = "mdio";
159 lantiq,pins = "io37", "io44";
165 lantiq,pins = "io38";
174 compatible = "lantiq,nor";
176 reg = <0 0x0 0x1000000>;
177 #address-cells = <1>;
181 compatible = "fixed-partitions";
182 #address-cells = <1>;
184 urlader: partition@0 {
186 reg = <0x00000 0x20000>;
192 reg = <0x20000 0xf60000>;
197 reg = <0xf80000 0x40000>;
203 reg = <0xfc0000 0x40000>;
213 #interrupt-cells = <1>;
215 #address-cells = <3>;
219 compatible = "pci168c,002e";
221 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */