5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
9 compatible = "avm,fritz7360sl", "lantiq,xway", "lantiq,vr9";
10 model = "1&1 HomeServer";
13 bootargs = "console=ttyLTQ0,115200";
17 led-boot = &power_green;
18 led-failsafe = &power_red;
19 led-running = &power_green;
21 led-dsl = &info_green;
26 reg = <0x0 0x8000000>;
30 compatible = "gpio-keys-polled";
33 poll-interval = <100>;
36 gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
37 linux,code = <KEY_PHONE>;
41 gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
42 linux,code = <KEY_WLAN>;
47 compatible = "gpio-leds";
50 label = "fritz7360sl:green:power";
51 gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
52 default-state = "keep";
55 label = "fritz7360sl:red:power";
56 gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
59 label = "fritz7360sl:red:info";
60 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
62 info_green: info_green {
63 label = "fritz7360sl:green:info";
64 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
67 label = "fritz7360sl:green:wlan";
68 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
71 label = "fritz7360sl:green:dect";
72 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
79 compatible = "lantiq,xrx200-pdi";
83 mtd-mac-address = <&urlader 0xa91>;
84 mtd-mac-address-increment = <(-2)>;
88 compatible = "lantiq,xrx200-pdi-port";
94 compatible = "lantiq,xrx200-pdi-port";
100 compatible = "lantiq,xrx200-pdi-port";
103 phy-handle = <&phy11>;
106 compatible = "lantiq,xrx200-pdi-port";
109 phy-handle = <&phy13>;
114 #address-cells = <1>;
116 compatible = "lantiq,xrx200-mdio";
119 phy0: ethernet-phy@0 {
121 compatible = "ethernet-phy-ieee802.3-c22";
122 reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
124 phy1: ethernet-phy@1 {
126 compatible = "ethernet-phy-ieee802.3-c22";
127 reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
129 phy11: ethernet-phy@11 {
131 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
133 phy13: ethernet-phy@13 {
135 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
141 lantiq,gphy-mode = <GPHY_MODE_GE>;
145 lantiq,gphy-mode = <GPHY_MODE_GE>;
149 pinctrl-names = "default";
150 pinctrl-0 = <&state_default>;
152 state_default: pinmux {
154 lantiq,groups = "mdio";
155 lantiq,function = "mdio";
158 lantiq,pins = "io37", "io44";
164 lantiq,pins = "io38";
173 compatible = "lantiq,nor";
175 reg = <0 0x0 0x1000000>;
176 #address-cells = <1>;
180 compatible = "fixed-partitions";
181 #address-cells = <1>;
183 urlader: partition@0 {
185 reg = <0x00000 0x20000>;
191 reg = <0x20000 0xf60000>;
196 reg = <0xf80000 0x40000>;
202 reg = <0xfc0000 0x40000>;
212 #interrupt-cells = <1>;
214 #address-cells = <3>;
218 compatible = "pci168c,002e";
220 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */