5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
9 model = "BT OpenReach VDSL Modem";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_green;
17 led-failsafe = &power_red;
18 led-running = &power_green;
24 reg = <0x0 0x2000000>;
28 compatible = "lantiq,phy-xrx200";
29 firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/
30 firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/
35 compatible = "gpio-keys-polled";
38 poll-interval = <100>;
41 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
42 linux,code = <KEY_RESTART>;
47 compatible = "gpio-leds";
50 label = "vg3503j:red:power";
51 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
54 label = "vg3503j:green:dsl";
55 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
58 label = "vg3503j:green:power";
59 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
60 default-state = "keep";
67 compatible = "lantiq,xrx200-pdi";
74 compatible = "lantiq,xrx200-pdi-port";
77 phy-handle = <&phy11>;
80 compatible = "lantiq,xrx200-pdi-port";
83 phy-handle = <&phy13>;
90 compatible = "lantiq,xrx200-mdio";
93 phy11: ethernet-phy@11 {
95 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
96 lantiq,led1h = <0x70>;
97 lantiq,led1l = <0x00>;
98 lantiq,led2h = <0x00>;
99 lantiq,led2l = <0x03>;
101 phy13: ethernet-phy@13 {
103 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
104 lantiq,led1h = <0x70>;
105 lantiq,led1l = <0x00>;
106 lantiq,led2h = <0x00>;
107 lantiq,led2l = <0x03>;
113 pinctrl-names = "default";
114 pinctrl-0 = <&state_default>;
116 state_default: pinmux {
118 lantiq,groups = "mdio";
119 lantiq,function = "mdio";
122 lantiq,groups = "gphy0 led0", "gphy0 led1",
123 "gphy0 led2", "gphy1 led0",
124 "gphy1 led1", "gphy1 led2";
125 lantiq,function = "gphy";
127 lantiq,open-drain = <0>;
135 compatible = "lantiq,nor";
137 reg = <0 0x0 0x2000000>;
138 #address-cells = <1>;
142 compatible = "fixed-partitions";
143 #address-cells = <1>;
148 reg = <0x00000 0x20000>;
153 reg = <0x20000 0x7d0000>;
158 reg = <0x7f0000 0x10000>;