5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
9 model = "BT OpenReach VDSL Modem";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_green;
17 led-failsafe = &power_red;
18 led-running = &power_green;
24 reg = <0x0 0x2000000>;
29 ranges = <0 0 0x0 0x3ffffff>;
31 compatible = "lantiq,nor";
33 reg = <0 0x0 0x2000000>;
38 compatible = "fixed-partitions";
44 reg = <0x00000 0x20000>;
49 reg = <0x20000 0x7d0000>;
54 reg = <0x7f0000 0x10000>;
60 gpio: pinmux@E100B10 {
61 pinctrl-names = "default";
62 pinctrl-0 = <&state_default>;
64 state_default: pinmux {
66 lantiq,groups = "mdio";
67 lantiq,function = "mdio";
70 lantiq,groups = "gphy0 led0", "gphy0 led1",
71 "gphy0 led2", "gphy1 led0",
72 "gphy1 led1", "gphy1 led2";
73 lantiq,function = "gphy";
75 lantiq,open-drain = <0>;
83 compatible = "lantiq,phy-xrx200";
84 firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/
85 firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/
90 compatible = "gpio-keys-polled";
93 poll-interval = <100>;
96 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
97 linux,code = <KEY_RESTART>;
102 compatible = "gpio-leds";
105 label = "vg3503j:red:power";
106 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
109 label = "vg3503j:green:dsl";
110 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
113 label = "vg3503j:green:power";
114 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
115 default-state = "keep";
122 compatible = "lantiq,xrx200-pdi";
123 #address-cells = <1>;
129 compatible = "lantiq,xrx200-pdi-port";
132 phy-handle = <&phy11>;
135 compatible = "lantiq,xrx200-pdi-port";
138 phy-handle = <&phy13>;
143 #address-cells = <1>;
145 compatible = "lantiq,xrx200-mdio";
146 phy11: ethernet-phy@11 {
148 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
149 lantiq,led1h = <0x70>;
150 lantiq,led1l = <0x00>;
151 lantiq,led2h = <0x00>;
152 lantiq,led2l = <0x03>;
154 phy13: ethernet-phy@13 {
156 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
157 lantiq,led1h = <0x70>;
158 lantiq,led1l = <0x00>;
159 lantiq,led2h = <0x00>;
160 lantiq,led2l = <0x03>;