3 #include <dt-bindings/input/input.h>
7 bootargs = "root= console=ttyLTQ0,115200";
11 led-boot = &power_green;
12 led-failsafe = &power_red;
13 led-running = &power_green;
14 led-upgrade = &power_green;
17 led-internet = &internet;
19 led-wifi = &wifi_green;
23 device_type = "memory";
24 reg = <0x0 0x4000000>;
28 compatible = "realtek,rtl8366rb";
29 gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>;
30 gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>;
47 compatible = "gpio-keys-polled";
48 poll-interval = <100>;
52 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
53 linux,code = <KEY_RFKILL>;
57 gpios = <&gpio 54 GPIO_ACTIVE_LOW>;
58 linux,code = <KEY_WPS_BUTTON>;
62 gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
63 linux,code = <KEY_RESTART>;
68 compatible = "gpio-leds";
70 label = "dgn3500:green:internet";
71 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
74 label = "dgn3500:red:internet";
75 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
78 label = "dgn3500:green:dsl";
79 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
82 label = "dgn3500:green:usb";
83 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
86 label = "dgn3500:green:power";
87 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
88 default-state = "keep";
91 label = "dgn3500:red:power";
92 gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
95 label = "dgn3500:green:wireless";
96 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
99 label = "dgn3500:amber:wireless";
100 gpios = <&gpio 51 GPIO_ACTIVE_LOW>;
103 label = "dgn3500:green:wps";
104 gpios = <&gpio 52 GPIO_ACTIVE_LOW>;
110 pinctrl-names = "default";
111 pinctrl-0 = <&state_default>;
113 state_default: pinmux {
115 lantiq,groups = "exin1";
116 lantiq,function = "exin";
128 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
129 pinctrl-names = "default";
131 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
134 compatible = "pci168c,0029";
135 reg = <0x7000 0 0 0 0>;
136 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
144 compatible = "jedec,spi-nor";
146 spi-max-frequency = <20000000>;
149 compatible = "fixed-partitions";
150 #address-cells = <1>;
160 reg = <0x10000 0x10000>;
161 label = "u-boot-env";
165 ath9k_cal: partition@20000 {
166 reg = <0x20000 0x10000>;
167 label = "calibration";
172 reg = <0x50000 0xfa0000>;