5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_blue;
17 led-failsafe = &power_red;
18 led-running = &power_blue;
19 led-upgrade = &power_blue;
27 device_type = "memory";
28 reg = <0x0 0x2000000>;
32 compatible = "ath5k,eeprom";
33 ath,eep-flash = <&boardconfig 0x400>;
34 ath,mac-offset = <0x0>;
39 compatible = "gpio-keys-polled";
40 poll-interval = <100>;
44 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_RFKILL>;
49 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_WPS_BUTTON>;
54 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_RESTART>;
60 compatible = "gpio-leds";
62 label = "arv452cqw:blue:power";
63 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
64 default-state = "keep";
67 label = "arv452cqw:blue:dsl";
68 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
71 label = "arv452cqw:blue:isdn";
72 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
75 label = "arv452cqw:red:power";
76 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
79 label = "arv452cqw:blue:wps";
80 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
83 label = "arv452cqw:yellow:wps";
84 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
87 label = "arv452cqw:blue:telefon1";
88 gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
91 label = "arv452cqw:blue:telefon2";
92 gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
95 label = "arv452cqw:red:wps";
96 gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
99 label = "arv452cqw:blue:line";
100 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
103 label = "arv452cqw:blue:sprache";
104 gpios = <&gpiomm 4 1>;
107 label = "arv452cqw:blue:usb";
108 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
111 label = "arv452cqw:blue:wlan";
112 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
115 internet blue and internet red are missing
116 dsl2 and dsl3 are not referenced in manual
119 label = "arv452cqw:yellow:dsl";
120 gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
123 label = "arv452cqw:red:dsl";
124 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
128 usb_vbus: regulator-usb-vbus {
129 compatible = "regulator-fixed";
131 regulator-name = "USB_VBUS";
133 regulator-min-microvolt = <5000000>;
134 regulator-max-microvolt = <5000000>;
136 gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
142 pinctrl-names = "default";
143 pinctrl-0 = <&state_default>;
145 state_default: pinmux {
147 lantiq,groups = "ebu cs1";
148 lantiq,function = "ebu";
151 lantiq,pins = "io21";
156 lantiq,pins = "io3", "io5", "io6", "io7", "io9";
163 #define ARV452CPW_SWITCH_RESET 110
167 mtd-mac-address = <&boardconfig 0x16>;
172 compatible = "lantiq,nor";
174 reg = <0 0x0 0x400000>;
177 compatible = "fixed-partitions";
178 #address-cells = <1>;
183 reg = <0x00000 0x10000>;
188 label = "u-boot-env";
189 reg = <0x10000 0x10000>;
195 reg = <0x20000 0x3d0000>;
198 boardconfig: partition@3f0000 {
199 label = "boardconfig";
200 reg = <0x3f0000 0x10000>;
207 compatible = "lantiq,gpio-mm";
209 #address-cells = <1>;
213 lantiq,shadow = <0x77f>;
220 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
221 pinctrl-names = "default";
223 lantiq,external-clock;
224 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
233 vbus-supply = <&usb_vbus>;
238 gpios = <&gpio 31 GPIO_ACTIVE_HIGH
239 &gpiomm 7 GPIO_ACTIVE_HIGH>;