5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
9 compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
10 model = "BT OpenReach VDSL Modem";
13 bootargs = "console=ttyLTQ0,115200";
17 led-boot = &power_green;
18 led-failsafe = &power_red;
19 led-running = &power_green;
20 led-upgrade = &power_green;
26 device_type = "memory";
27 reg = <0x0 0x2000000>;
31 compatible = "gpio-keys-polled";
32 poll-interval = <100>;
35 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
36 linux,code = <KEY_RESTART>;
41 compatible = "gpio-leds";
44 label = "vg3503j:red:power";
45 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
48 label = "vg3503j:green:dsl";
49 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
52 label = "vg3503j:green:power";
53 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
54 default-state = "keep";
60 pinctrl-0 = <&mdio_pins>,
61 <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>,
62 <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>;
65 compatible = "lantiq,xrx200-pdi";
72 compatible = "lantiq,xrx200-pdi-port";
75 phy-handle = <&phy11>;
78 compatible = "lantiq,xrx200-pdi-port";
81 phy-handle = <&phy13>;
88 compatible = "lantiq,xrx200-mdio";
90 phy11: ethernet-phy@11 {
92 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
93 lantiq,led1h = <0x70>;
94 lantiq,led1l = <0x00>;
95 lantiq,led2h = <0x00>;
96 lantiq,led2l = <0x03>;
98 phy13: ethernet-phy@13 {
100 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
101 lantiq,led1h = <0x70>;
102 lantiq,led1l = <0x00>;
103 lantiq,led2h = <0x00>;
104 lantiq,led2l = <0x03>;
110 lantiq,gphy-mode = <GPHY_MODE_GE>;
114 lantiq,gphy-mode = <GPHY_MODE_GE>;
119 compatible = "lantiq,nor";
121 reg = <0 0x0 0x2000000>;
124 compatible = "fixed-partitions";
125 #address-cells = <1>;
130 reg = <0x00000 0x20000>;
135 reg = <0x20000 0x7d0000>;
139 label = "u-boot-env";
140 reg = <0x7f0000 0x10000>;