5 #include <dt-bindings/input/input.h>
8 compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube";
12 bootargs = "console=ttyLTQ0,115200";
16 led-boot = &power_red;
17 led-failsafe = &power_blue;
18 led-running = &power_red;
19 led-upgrade = &power_red;
21 led-dsl = &internet_red;
25 label-mac-device = &wifi0;
29 device_type = "memory";
30 reg = <0x0 0x4000000>;
34 compatible = "gpio-keys-polled";
35 poll-interval = <100>;
39 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
40 linux,code = <KEY_WPS_BUTTON>;
44 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
45 linux,code = <KEY_POWER>;
49 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
54 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_RESTART>;
60 compatible = "gpio-leds";
62 label = "arv752dpw:blue:power";
63 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
65 internet_red: internet {
66 label = "arv752dpw:red:internet";
67 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
70 label = "arv752dpw:red:message";
71 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
74 label = "arv752dpw:red:power";
75 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
76 default-state = "keep";
79 label = "arv752dpw:red:voice";
80 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
83 label = "arv752dpw:red:umts";
84 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
87 label = "arv752dpw:red:wifi";
88 gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
91 label = "arv752dpw:green:tae-n";
92 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
95 label = "arv752dpw:green:tae-u";
96 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
99 label = "arv752dpw:green:isdn";
100 gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
103 label = "arv752dpw:blue:internet";
104 gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
107 label = "arv752dpw:blue:voice";
108 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
112 usb_vbus: regulator-usb-vbus {
113 compatible = "regulator-fixed";
115 regulator-name = "USB_VBUS";
117 regulator-min-microvolt = <5000000>;
118 regulator-max-microvolt = <5000000>;
120 gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
126 pinctrl-names = "default";
127 pinctrl-0 = <&state_default>;
129 state_default: pinmux {
131 lantiq,groups = "ebu cs1";
132 lantiq,function = "ebu";
135 lantiq,groups = "exin1";
136 lantiq,function = "exin";
141 lantiq,pins = "io21";
146 lantiq,pins = "io3", "io5", "io6", "io8";
151 lantiq,pins = "io11", "io12", "io13", "io28";
154 lantiq,open-drain = <1>;
161 mtd-mac-address = <&boardconfig 0x16>;
166 compatible = "lantiq,nor";
168 reg = <0 0x0 0x800000>;
171 compatible = "fixed-partitions";
172 #address-cells = <1>;
177 reg = <0x00000 0x10000>;
182 label = "u-boot-env";
183 reg = <0x10000 0x10000>;
189 reg = <0x20000 0x7d0000>;
192 boardconfig: partition@7f0000 {
193 label = "board_config";
194 reg = <0x7f0000 0x10000>;
201 compatible = "lantiq,gpio-mm";
203 #address-cells = <1>;
207 lantiq,shadow = <0x3>;
214 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>, <&pci_req2_pins>;
215 pinctrl-names = "default";
217 lantiq,external-clock;
218 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
219 interrupt-map = <0x7000 0 0 1 &icu0 135>;
222 wifi0: wifi@1814,0601 {
223 compatible = "pci1814,0601";
224 reg = <0x7000 0 0 0 0>;
225 mtd-mac-address = <&boardconfig 0x16>;
226 ralink,mtd-eeprom = <&boardconfig 0x410>;
227 ralink,mtd-eeprom-swap;
237 vbus-supply = <&usb_vbus>;
242 gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;