3 #include <dt-bindings/input/input.h>
6 compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube";
10 bootargs = "console=ttyLTQ0,115200";
14 led-boot = &power_red;
15 led-failsafe = &power_blue;
16 led-running = &power_red;
17 led-upgrade = &power_red;
19 led-dsl = &internet_red;
25 device_type = "memory";
26 reg = <0x0 0x4000000>;
30 compatible = "gpio-keys-polled";
31 poll-interval = <100>;
35 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
36 linux,code = <KEY_WPS_BUTTON>;
40 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
41 linux,code = <KEY_POWER>;
45 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
50 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
51 linux,code = <KEY_RESTART>;
56 compatible = "gpio-leds";
58 label = "arv752dpw22:blue:power";
59 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
61 internet_red: internet {
62 label = "arv752dpw22:red:internet";
63 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
66 label = "arv752dpw22:red:message";
67 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
70 label = "arv752dpw22:red:power";
71 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
72 default-state = "keep";
75 label = "arv752dpw22:red:voice";
76 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
79 label = "arv752dpw22:red:umts";
80 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
83 label = "arv752dpw22:red:wifi";
84 gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
87 label = "arv752dpw22:green:tae-n";
88 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
91 label = "arv752dpw22:green:tae-u";
92 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
95 label = "arv752dpw22:green:isdn";
96 gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>;
99 label = "arv752dpw22:blue:internet";
100 gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
103 label = "arv752dpw22:blue:voice";
104 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
107 label = "arv752dpw22:green:lan1";
108 gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>;
111 label = "arv752dpw22:green:lan2";
112 gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>;
115 label = "arv752dpw22:green:lan3";
116 gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>;
119 label = "arv752dpw22:green:lan4";
120 gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>;
124 usb_vbus: regulator-usb-vbus {
125 compatible = "regulator-fixed";
127 regulator-name = "USB_VBUS";
129 regulator-min-microvolt = <5000000>;
130 regulator-max-microvolt = <5000000>;
132 gpio = <&gpiomm 0 GPIO_ACTIVE_HIGH>;
138 pinctrl-names = "default";
139 pinctrl-0 = <&state_default>;
141 state_default: pinmux {
143 lantiq,groups = "ebu cs1";
144 lantiq,function = "ebu";
147 lantiq,groups = "exin1";
148 lantiq,function = "exin";
153 lantiq,pins = "io21";
154 lantiq,open-drain = <1>;
158 lantiq,pins = "io3", "io5", "io6", "io8";
159 lantiq,open-drain = <1>;
163 lantiq,pins = "io11", "io12", "io13", "io28";
172 mtd-mac-address = <&boardconfig 0x16>;
177 compatible = "lantiq,nor";
179 reg = <0 0x0 0x800000>;
182 compatible = "fixed-partitions";
183 #address-cells = <1>;
188 reg = <0x00000 0x30000>;
193 label = "u-boot-env";
194 reg = <0x30000 0x10000>;
200 reg = <0x40000 0x7b0000>;
203 boardconfig: partition@7f0000 {
204 label = "board_config";
205 reg = <0x7f0000 0x10000>;
212 compatible = "lantiq,gpio-mm";
214 #address-cells = <1>;
225 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
226 pinctrl-names = "default";
228 lantiq,external-clock;
230 0x7000 0 0 1 &icu0 30
231 0x7800 0 0 1 &icu0 135
232 0x7800 0 0 2 &icu0 135
233 0x7800 0 0 3 &icu0 135
235 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
239 compatible = "pci1814,3592";
240 reg = <0x7000 0 0 0 0>;
241 ralink,mtd-eeprom = <&boardconfig 0x410>;
242 ralink,mtd-eeprom-swap;
243 mtd-mac-address = <&boardconfig 0x16>;
253 vbus-supply = <&usb_vbus>;
258 gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;