3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
7 compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9";
10 bootargs = "console=ttyLTQ0,115200";
15 led-failsafe = &power;
24 device_type = "memory";
25 reg = <0x0 0x4000000>;
29 compatible = "gpio-keys-polled";
30 poll-interval = <100>;
33 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
34 linux,code = <KEY_RESTART>;
38 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
39 linux,code = <KEY_PHONE>;
44 compatible = "gpio-leds";
47 label = "easy80920:green:power";
48 gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
49 default-state = "keep";
52 label = "easy80920:green:warning";
53 gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
56 label = "easy80920:green:fxs1";
57 gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
60 label = "easy80920:green:fxs2";
61 gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
64 label = "easy80920:green:fxo";
65 gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
68 label = "easy80920:green:usb1";
69 gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
72 label = "easy80920:green:usb2";
73 gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
76 label = "easy80920:green:sd";
77 gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
80 label = "easy80920:green:wps";
81 gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
85 usb_vbus: regulator-usb-vbus {
86 compatible = "regulator-fixed";
88 regulator-name = "USB_VBUS";
90 regulator-min-microvolt = <5000000>;
91 regulator-max-microvolt = <5000000>;
93 gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
100 compatible = "lantiq,xrx200-pdi";
101 #address-cells = <1>;
107 compatible = "lantiq,xrx200-pdi-port";
110 phy-handle = <&phy0>;
113 compatible = "lantiq,xrx200-pdi-port";
116 phy-handle = <&phy1>;
119 compatible = "lantiq,xrx200-pdi-port";
122 phy-handle = <&phy11>;
125 compatible = "lantiq,xrx200-pdi-port";
128 phy-handle = <&phy13>;
133 compatible = "lantiq,xrx200-pdi";
134 #address-cells = <1>;
140 compatible = "lantiq,xrx200-pdi-port";
143 phy-handle = <&phy5>;
148 #address-cells = <1>;
150 compatible = "lantiq,xrx200-mdio";
152 phy0: ethernet-phy@0 {
154 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
156 phy1: ethernet-phy@1 {
158 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
160 phy5: ethernet-phy@5 {
162 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
164 phy11: ethernet-phy@11 {
166 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
168 phy13: ethernet-phy@13 {
170 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
176 lantiq,gphy-mode = <GPHY_MODE_GE>;
180 lantiq,gphy-mode = <GPHY_MODE_GE>;
184 pinctrl-names = "default";
185 pinctrl-0 = <&state_default>;
187 state_default: pinmux {
189 lantiq,groups = "exin3";
190 lantiq,function = "exin";
193 lantiq,pins = "io21",
200 lantiq,pins = "io38";
205 lantiq,pins = "io39"; /* exin3 */
215 compatible = "jedec,spi-nor";
217 spi-max-frequency = <1000000>;
220 compatible = "fixed-partitions";
221 #address-cells = <1>;
226 label = "SPI (RO) U-Boot Image";
231 reg = <0x20000 0x10000>;
237 reg = <0x30000 0x10000>;
243 reg = <0x40000 0x10000>;
249 reg = <0x50000 0x3a0000>;
257 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
258 pinctrl-names = "default";
264 lantiq,shadow = <0xffff>;
265 lantiq,groups = <0x7>;
278 vbus-supply = <&usb_vbus>;