target/linux/layerscape/image/armv8_64b.mk

   1 #
   2 # Copyright 2018-2020 NXP
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7
   8 define Device/Default
   9   PROFILES := Default
  10   IMAGES := firmware.bin sysupgrade.bin
  11   FILESYSTEMS := squashfs
  12   KERNEL := kernel-bin | gzip | uImage gzip
  13   KERNEL_LOADADDR := 0x80080000
  14   KERNEL_ENTRY_POINT := 0x80080000
  15   DEVICE_DTS = freescale/$(subst _,-,$(1))
  16   SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
  17   IMAGE_SIZE := 64m
  18   IMAGE/sysupgrade.bin := append-kernel | pad-to 16M | \
  19     append-rootfs | pad-rootfs | \
  20     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
  21 endef
  22
  23 define Device/fsl_ls1012a-frdm
  24   DEVICE_VENDOR := NXP
  25   DEVICE_MODEL := FRDM-LS1012A
  26   DEVICE_PACKAGES += \
  27     layerscape-ppfe \
  28     tfa-ls1012a-frdm \
  29     kmod-ppfe
  30   BLOCKSIZE := 256KiB
  31   IMAGE/firmware.bin := \
  32     ls-clean | \
  33     ls-append $(1)-bl2.pbl | pad-to 1M | \
  34     ls-append $(1)-fip.bin | pad-to 5M | \
  35     ls-append $(1)-uboot-env.bin | pad-to 10M | \
  36     ls-append pfe.itb | pad-to 15M | \
  37     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  38     append-kernel | pad-to $$(BLOCKSIZE) | \
  39     append-rootfs | pad-rootfs | check-size
  40   IMAGE/sysupgrade.bin := append-kernel | pad-to $$(BLOCKSIZE) | \
  41     append-rootfs | pad-rootfs | \
  42     check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
  43   KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  44   KERNEL_INITRAMFS := kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  45 endef
  46 TARGET_DEVICES += fsl_ls1012a-frdm
  47
  48 define Device/fsl_ls1012a-rdb
  49   DEVICE_VENDOR := NXP
  50   DEVICE_MODEL := LS1012A-RDB
  51   DEVICE_PACKAGES += \
  52     layerscape-ppfe \
  53     tfa-ls1012a-rdb \
  54     kmod-ppfe
  55   IMAGE/firmware.bin := \
  56     ls-clean | \
  57     ls-append $(1)-bl2.pbl | pad-to 1M | \
  58     ls-append $(1)-fip.bin | pad-to 5M | \
  59     ls-append $(1)-uboot-env.bin | pad-to 10M | \
  60     ls-append pfe.itb | pad-to 15M | \
  61     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  62     append-kernel | pad-to 32M | \
  63     append-rootfs | pad-rootfs | check-size
  64 endef
  65 TARGET_DEVICES += fsl_ls1012a-rdb
  66
  67 define Device/fsl_ls1012a-frwy-sdboot
  68   DEVICE_VENDOR := NXP
  69   DEVICE_MODEL := FRWY-LS1012A
  70   DEVICE_PACKAGES += \
  71     layerscape-ppfe \
  72     tfa-ls1012a-frwy-sdboot \
  73     kmod-ppfe
  74   DEVICE_DTS := freescale/fsl-ls1012a-frwy
  75   FILESYSTEMS := ext4
  76   IMAGES := firmware.bin sdcard.img sysupgrade.bin
  77   IMAGE/firmware.bin := \
  78     ls-clean | \
  79     ls-append $(1)-bl2.pbl | pad-to 128K | \
  80     ls-append pfe.itb | pad-to 384K | \
  81     ls-append $(1)-fip.bin | pad-to 1856K | \
  82     ls-append $(1)-uboot-env.bin | pad-to 2048K | \
  83     check-size 2097153
  84   IMAGE/sdcard.img := \
  85     ls-clean | \
  86     ls-append-sdhead $(1) | pad-to 15M | \
  87     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
  88     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  89     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
  90   IMAGE/sysupgrade.bin := \
  91     ls-clean | \
  92     ls-append-sdhead $(1) | pad-to 16M | \
  93     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
  94     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
  95 endef
  96 TARGET_DEVICES += fsl_ls1012a-frwy-sdboot
  97
  98 define Device/fsl_ls1043a-rdb
  99   DEVICE_VENDOR := NXP
 100   DEVICE_MODEL := LS1043A-RDB
 101   DEVICE_VARIANT := Default
 102   DEVICE_PACKAGES += \
 103     layerscape-fman \
 104     tfa-ls1043a-rdb \
 105     fmc fmc-eth-config
 106   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
 107   IMAGE/firmware.bin := \
 108     ls-clean | \
 109     ls-append $(1)-bl2.pbl | pad-to 1M | \
 110     ls-append $(1)-fip.bin | pad-to 5M | \
 111     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 112     ls-append $(1)-fman.bin | pad-to 15M | \
 113     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 114     append-kernel | pad-to 32M | \
 115     append-rootfs | pad-rootfs | check-size
 116 endef
 117 TARGET_DEVICES += fsl_ls1043a-rdb
 118
 119 define Device/fsl_ls1043a-rdb-sdboot
 120   DEVICE_VENDOR := NXP
 121   DEVICE_MODEL := LS1043A-RDB
 122   DEVICE_VARIANT := SD Card Boot
 123   DEVICE_PACKAGES += \
 124     layerscape-fman \
 125     tfa-ls1043a-rdb-sdboot \
 126     fmc fmc-eth-config
 127   DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
 128   FILESYSTEMS := ext4
 129   IMAGES := sdcard.img sysupgrade.bin
 130   IMAGE/sdcard.img := \
 131     ls-clean | \
 132     ls-append-sdhead $(1) | pad-to 4K | \
 133     ls-append $(1)-bl2.pbl | pad-to 1M | \
 134     ls-append $(1)-fip.bin | pad-to 5M | \
 135     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 136     ls-append fsl_ls1043a-rdb-fman.bin | pad-to 15M | \
 137     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 138     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 139     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 140   IMAGE/sysupgrade.bin := \
 141     ls-clean | \
 142     ls-append-sdhead $(1) | pad-to 16M | \
 143     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 144     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 145 endef
 146 TARGET_DEVICES += fsl_ls1043a-rdb-sdboot
 147
 148 define Device/fsl_ls1046a-rdb
 149   DEVICE_VENDOR := NXP
 150   DEVICE_MODEL := LS1046A-RDB
 151   DEVICE_VARIANT := Default
 152   DEVICE_PACKAGES += \
 153     layerscape-fman \
 154     tfa-ls1046a-rdb \
 155     fmc fmc-eth-config
 156   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
 157   IMAGE/firmware.bin := \
 158     ls-clean | \
 159     ls-append $(1)-bl2.pbl | pad-to 1M | \
 160     ls-append $(1)-fip.bin | pad-to 5M | \
 161     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 162     ls-append $(1)-fman.bin | pad-to 15M | \
 163     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 164     append-kernel | pad-to 32M | \
 165     append-rootfs | pad-rootfs | check-size
 166 endef
 167 TARGET_DEVICES += fsl_ls1046a-rdb
 168
 169 define Device/fsl_ls1046a-rdb-sdboot
 170   DEVICE_VENDOR := NXP
 171   DEVICE_MODEL := LS1046A-RDB
 172   DEVICE_VARIANT := SD Card Boot
 173   DEVICE_PACKAGES += \
 174     layerscape-fman \
 175     tfa-ls1046a-rdb-sdboot \
 176     fmc fmc-eth-config
 177   DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
 178   FILESYSTEMS := ext4
 179   IMAGES := sdcard.img sysupgrade.bin
 180   IMAGE/sdcard.img := \
 181     ls-clean | \
 182     ls-append-sdhead $(1) | pad-to 4K | \
 183     ls-append $(1)-bl2.pbl | pad-to 1M | \
 184     ls-append $(1)-fip.bin | pad-to 5M | \
 185     ls-append $(1)-uboot-env.bin | pad-to 9M | \
 186     ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \
 187     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 188     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 189     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 190   IMAGE/sysupgrade.bin := \
 191     ls-clean | \
 192     ls-append-sdhead $(1) | pad-to 16M | \
 193     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 194     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 195 endef
 196 TARGET_DEVICES += fsl_ls1046a-rdb-sdboot
 197
 198 define Device/fsl_ls1088a-rdb
 199   DEVICE_VENDOR := NXP
 200   DEVICE_MODEL := LS1088A-RDB
 201   DEVICE_VARIANT := Default
 202   DEVICE_PACKAGES += \
 203     layerscape-mc \
 204     layerscape-dpl \
 205     tfa-ls1088a-rdb \
 206     restool
 207   IMAGE/firmware.bin := \
 208     ls-clean | \
 209     ls-append $(1)-bl2.pbl | pad-to 1M | \
 210     ls-append $(1)-fip.bin | pad-to 5M | \
 211     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 212     ls-append $(1)-mc.itb | pad-to 13M | \
 213     ls-append $(1)-dpl.dtb | pad-to 14M | \
 214     ls-append $(1)-dpc.dtb | pad-to 15M | \
 215     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 216     append-kernel | pad-to 32M | \
 217     append-rootfs | pad-rootfs | check-size
 218 endef
 219 TARGET_DEVICES += fsl_ls1088a-rdb
 220
 221 define Device/fsl_ls1088a-rdb-sdboot
 222   DEVICE_VENDOR := NXP
 223   DEVICE_MODEL := LS1088A-RDB
 224   DEVICE_VARIANT := SD Card Boot
 225   DEVICE_PACKAGES += \
 226     layerscape-mc \
 227     layerscape-dpl \
 228     tfa-ls1088a-rdb-sdboot \
 229     restool
 230   DEVICE_DTS := freescale/fsl-ls1088a-rdb
 231   FILESYSTEMS := ext4
 232   IMAGES := sdcard.img sysupgrade.bin
 233   IMAGE/sdcard.img := \
 234     ls-clean | \
 235     ls-append-sdhead $(1) | pad-to 4K | \
 236     ls-append $(1)-bl2.pbl | pad-to 1M | \
 237     ls-append $(1)-fip.bin | pad-to 5M | \
 238     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 239     ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \
 240     ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \
 241     ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 15M | \
 242     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 243     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 244     append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
 245   IMAGE/sysupgrade.bin := \
 246     ls-clean | \
 247     ls-append-sdhead $(1) | pad-to 16M | \
 248     append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
 249     append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata
 250 endef
 251 TARGET_DEVICES += fsl_ls1088a-rdb-sdboot
 252
 253 define Device/fsl_ls2088a-rdb
 254   DEVICE_VENDOR := NXP
 255   DEVICE_MODEL := LS2088ARDB
 256   DEVICE_PACKAGES += \
 257     layerscape-mc \
 258     layerscape-dpl \
 259     tfa-ls2088a-rdb \
 260     restool
 261   IMAGE/firmware.bin := \
 262     ls-clean | \
 263     ls-append $(1)-bl2.pbl | pad-to 1M | \
 264     ls-append $(1)-fip.bin | pad-to 5M | \
 265     ls-append $(1)-uboot-env.bin | pad-to 10M | \
 266     ls-append $(1)-mc.itb | pad-to 13M | \
 267     ls-append $(1)-dpl.dtb | pad-to 14M | \
 268     ls-append $(1)-dpc.dtb | pad-to 15M | \
 269     ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
 270     append-kernel | pad-to 32M | \
 271     append-rootfs | pad-rootfs | check-size
 272 endef
 273 TARGET_DEVICES += fsl_ls2088a-rdb
 274
 275 define Device/traverse_ls1043
 276   DEVICE_VENDOR := Traverse
 277   DEVICE_MODEL := LS1043 Boards
 278   KERNEL_NAME := Image
 279   KERNEL_SUFFIX := -kernel.itb
 280   KERNEL_INSTALL := 1
 281   FDT_LOADADDR = 0x90000000
 282   FILESYSTEMS := ubifs
 283   MKUBIFS_OPTS := -m 1 -e 262016 -c 128
 284   DEVICE_PACKAGES += \
 285     layerscape-fman \
 286     uboot-envtools \
 287     kmod-i2c-mux-pca954x \
 288     kmod-hwmon-core \
 289     kmod-gpio-pca953x kmod-input-gpio-keys-polled \
 290     kmod-rtc-isl1208
 291   DEVICE_DESCRIPTION = \
 292     Build images for Traverse LS1043 boards. This generates a single image \
 293     capable of booting on any of the boards in this family.
 294   DEVICE_DTS = freescale/traverse-ls1043s
 295   DEVICE_DTS_DIR = $(LINUX_DIR)/arch/arm64/boot/dts
 296   DEVICE_DTS_CONFIG = ls1043s
 297   KERNEL := kernel-bin | gzip | traverse-fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
 298   KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
 299   IMAGES = root sysupgrade.bin
 300   IMAGE/root = append-rootfs
 301   IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
 302   MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
 303   SUPPORTED_DEVICES := traverse,ls1043s traverse,ls1043v
 304 endef
 305 TARGET_DEVICES += traverse_ls1043