1 From 153d669864c9280698641a6708c5ddcffbfeda26 Mon Sep 17 00:00:00 2001
2 From: Calvin Johnson <calvin.johnson@nxp.com>
3 Date: Tue, 20 Nov 2018 21:51:53 +0530
4 Subject: [PATCH] net: fsl_ppfe: update dts properties for phy
6 Use commonly used phy-handle property and mdio subnode to handle
9 Deprecate bindings fsl,gemac-phy-id & fsl,pfe-phy-if-flags.
11 Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
13 .../devicetree/bindings/net/fsl_ppfe/pfe.txt | 60 ++++++++++++++++------
14 1 file changed, 43 insertions(+), 17 deletions(-)
16 --- a/Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
17 +++ b/Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt
18 @@ -127,11 +127,12 @@ PROPERTIES
19 Definition: Must be present. Value should be the id of the bus
25 - Definition: Must be present. Value should be the id of the phy
27 +- fsl,gemac-phy-id (deprecated binding)
30 + Definition: This binding shouldn't be used with new platforms.
31 + Must be present. Value should be the id of the phy
36 @@ -144,15 +145,20 @@ PROPERTIES
38 Definition: Must include "sgmii"
40 -- fsl,pfe-phy-if-flags
43 - Definition: Must be present. Value should be 0 by default.
44 - If there is not phy connected, this need to be 1.
45 +- fsl,pfe-phy-if-flags (deprecated binding)
48 + Definition: This binding shouldn't be used with new platforms.
49 + Must be present. Value should be 0 by default.
50 + If there is not phy connected, this need to be 1.
54 + Value type: <phandle>
55 + Definition: phandle to the PHY device connected to this device.
58 - optional subnode that specifies the mdio bus. This has reg
59 - property which is used to enable/disable the mdio bus.
60 +- mdio : A required subnode which specifies the mdio bus in the PFE and used as
61 +a container for phy nodes according to ../phy.txt.
65 @@ -162,12 +168,32 @@ ethernet@0 {
67 reg = <0x0>; /* GEM_ID */
68 fsl,gemac-bus-id = <0x0>; /* BUS_ID */
69 - fsl,gemac-phy-id = <0x2>; /* PHY_ID */
70 fsl,mdio-mux-val = <0x0>;
72 - fsl,pfe-phy-if-flags = <0x0>;
73 + phy-handle = <&sgmii_phy1>;
78 + compatible = "fsl,pfe-gemac-port";
79 + #address-cells = <1>;
81 + reg = <0x1>; /* GEM_ID */
82 + fsl,gemac-bus-id = <0x1>; /* BUS_ID */
83 + fsl,mdio-mux-val = <0x0>;
85 + phy-handle = <&sgmii_phy2>;
89 + #address-cells = <1>;
92 + sgmii_phy1: ethernet-phy@2 {
97 - reg = <0x1>; /* enabled/disabled */
98 + sgmii_phy2: ethernet-phy@1 {